CFD for a turbine blade (literature)

stefanbj · April 14, 2013, 17:13

Hi all.

I intend to do 2D N-S for a 2D turbine blade.

I am looking for some literature on the results of CFD for a flow over a 2D turbine blade. Perhaps also, review of the theory of operation and critical variables for the blade.

Also, do you know where I can get the grid points for the geometry of a 2D turbine blade?

I am going to do everything in Fortran

jola · April 14, 2013, 17:31

You can get an overview of some important things to consider here:

http://www.cfd-online.com/Wiki/Best_...omachinery_CFD

One classical open LP turbine blade geometry is the T106. I Googled it quickly and found this site at Whittle lab where you can download the geometry from:

http://www-g.eng.cam.ac.uk/whittle/T106/Start.html

If you want HP type of blades there are several that were tested at VKI which I also think are open. You'll have to Google for these yourself. They were called something like MUR XXX, where XXX is a number, if my memory serves me well today.

Good luck.

stefanbj · April 14, 2013, 18:55

Thank you for this information.

April 14, 2013, 17:13	CFD for a turbine blade (literature)	#1
stefanbj New Member Stefan Bjornsson Join Date: Apr 2013 Posts: 7 Rep Power: 13	Hi all. I intend to do 2D N-S for a 2D turbine blade. I am looking for some literature on the results of CFD for a flow over a 2D turbine blade. Perhaps also, review of the theory of operation and critical variables for the blade. Also, do you know where I can get the grid points for the geometry of a 2D turbine blade? I am going to do everything in Fortran

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFD Design...The CFD Future	John C. Chien	Main CFD Forum	20	November 19, 2015 23:40
CFD of gas Turbine blade	Ali Raza Abid	Main CFD Forum	9	February 18, 2012 05:04
Can I use Turbogrid to mesh a wind turbine blade?	Henry Liu	CFX	10	November 10, 2011 05:41
Calculating lift force of a wind turbine blade problem	LittleBart	CFX	4	June 29, 2011 02:33
Modelling of 2D Wind Turbine Blade (HAWT)	Richeom	FLUENT	1	August 11, 2010 04:18

April 14, 2013, 17:31		#2
jola Administrator Jonas Larsson Join Date: Jan 2009 Location: Gothenburg, Sweden Posts: 824 Rep Power: 10	You can get an overview of some important things to consider here: http://www.cfd-online.com/Wiki/Best_...omachinery_CFD One classical open LP turbine blade geometry is the T106. I Googled it quickly and found this site at Whittle lab where you can download the geometry from: http://www-g.eng.cam.ac.uk/whittle/T106/Start.html If you want HP type of blades there are several that were tested at VKI which I also think are open. You'll have to Google for these yourself. They were called something like MUR XXX, where XXX is a number, if my memory serves me well today. Good luck.

April 14, 2013, 18:55		#3
stefanbj New Member Stefan Bjornsson Join Date: Apr 2013 Posts: 7 Rep Power: 13	Thank you for this information.