|
[Sponsors] |
August 31, 2016, 20:05 |
Multi phase VOF-PLIC Jetsam Flotsam
|
#1 |
New Member
Yous van Halder
Join Date: Jul 2016
Posts: 2
Rep Power: 0 |
Hi,
I am currently busy writing a VOF-PLIC code for a dambreak problem. I use a VOF PLIC method, but I still have some issues (see the attached picture). The PLIC method uses Youngs finite differencing for approximating the unit normal (so no ELVIRA or Least Squares). I use a split advection scheme (explicit-explicit) and I also tried an unsplit langangian advection (also didn't do the job). I discretised the Navier Stokes equations using a simple first order time integration and central differencing for the spatial discretisation on a staggered grid. This is on a 128x128 grid, a timestep of dt = 0.0001, a density ratio of 1/2 (rho1 = 1 and rho2 = 2) and no surface tension. I encounter some strange pieces of fluid outside the red phase after the several timesteps. Can someone help me to solve this problem? Gr Yous |
|
March 26, 2018, 13:13 |
|
#2 |
New Member
Join Date: Jun 2017
Posts: 3
Rep Power: 9 |
Did you ever have any success in resolving this issue? I'm also writing a code using the same structure as what you described and am also generating this flotsam.
|
|
Tags |
multi phase, multi phase flow, vof method |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
multi phase flow with chemical reactions in one phase | Habibfateh | OpenFOAM Programming & Development | 0 | February 10, 2014 08:33 |
one phase outlet VOF - Model | Jim87 | FLUENT | 6 | November 13, 2013 03:15 |
set up of volume fraction of the thrid phase in VOF | fevi84 | FLUENT | 0 | April 27, 2012 18:22 |
Extract primary phase thread in VOF with 3 phases | Eric | FLUENT | 2 | July 7, 2011 03:22 |
VOF for single phase? | vuccj7 | FLUENT | 0 | April 20, 2011 20:59 |