|
[Sponsors] |
September 4, 2017, 07:59 |
SST k-w
|
#1 |
Member
zxc
Join Date: Mar 2015
Posts: 35
Rep Power: 11 |
hi
what is the meaning of cross-diffusion term ?what does it model? Thanks |
|
September 6, 2017, 02:19 |
|
#2 |
Senior Member
|
It act as secondary gradient in non-orthogonal meshes (like poly-hydra). So it gives identical results to that of k-e for k-omega model. SST k-w has to incorporate this diffusive term as it is a combination of k-w and k-e. So not considering this term will give unstable solution in more skewed mesh. Also the near boundary fluxes will be assumed wrong.
|
|
September 6, 2017, 02:44 |
|
#3 |
Member
zxc
Join Date: Mar 2015
Posts: 35
Rep Power: 11 |
Thanks alot
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
One more time: wall functions - SST | CellZone | OpenFOAM Pre-Processing | 22 | June 11, 2021 13:27 |
Near wall treatment in k-omega SST | Arnoldinho | OpenFOAM Running, Solving & CFD | 38 | March 8, 2017 13:48 |
General question about SST turbulence model | Richard Renaud | CFD Freelancers | 1 | December 19, 2015 04:13 |
Laminar-to-turbulent transition modelling using SST and SST Gamma Theta models | ttu004 | CFX | 3 | June 13, 2014 06:43 |
Very Low Re: SST vs. v2-f? | CAVT | Main CFD Forum | 0 | September 25, 2010 04:34 |