|
[Sponsors] |
May 13, 2020, 16:12 |
Cross-check: Simulation Settings
|
#1 |
Senior Member
MA
Join Date: Mar 2020
Posts: 163
Rep Power: 6 |
Hi,
I am using the domain as shown in the picture below. The blade rotates clockwise in XY plane, and the flow direction is along Z axis. Considering the reference coordinate system, I specified the directions as below; Correct me if I am wrong. Direction of rotation: [0,0,1] Flow Direction: [0,0,1] Velocity in Initial Conditions: [0,0,8 m/s] Direction for drag coefficient: [0,0,1] Direction for moment coefficient: [0,0,-1] Regards, |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
error to check simulation result: could not find valid OpenFOAM mesh | xiaoyoyo | OpenFOAM | 5 | May 18, 2017 11:38 |
Surface Source - Fixed Temperature? | robtheslob | FloEFD, FloWorks & FloTHERM | 18 | May 12, 2017 02:28 |
Proper settings for PimpleFoam Simulation | Mahe88 | OpenFOAM Running, Solving & CFD | 13 | March 16, 2017 11:47 |
Combustion simulation and SAGE settings | Owain_Parry | CONVERGE | 6 | January 21, 2017 09:56 |
HP Turbine Flow simulation Solver settings | Puneet | FLUENT | 1 | August 10, 2003 05:00 |