converting volumetric flow in to velocity for porous media Fluent -- CFD Online Discussion Forums

August 9, 2020, 03:57	converting volumetric flow in to velocity for porous media Fluent	#1
Gkchpa Member kumar Join Date: Dec 2019 Posts: 33 Rep Power: 6	Hello , I am simulating cooling fan , I would like to setup porous media in front of the fan as replica of radiator, As I have experimental data i.e volumetric flow vs delta pressure , in the Darcy's equation or some other Ansys tutorials it is calculated using velocity Vs deltapressure , I am little confused how to convert volumetric flow into velocity to get viscous & inertia resistance coefficients Thank you

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fluent - Flow/heat transfer over porous media - possibly interface issue	ayihan	FLUENT	0	March 3, 2018 18:55
2Phase flow simulation in Porous Media Ansys Fluent	Yaqub	FLUENT	0	June 22, 2017 03:46
Porous media setup issues in Fluent	Bernard Van	FLUENT	29	January 26, 2017 04:09
How can it possible to change by itself in volumetric flow rate of velocity inlet BC	oozcan	FLUENT	10	November 25, 2016 04:54
Momentum equation Fluent uses for flow through porous media	0906536m	FLUENT	0	July 6, 2015 15:54

All times are GMT -4. The time now is 02:05.