|
[Sponsors] |
January 5, 2001, 01:06 |
Islands in rivers
|
#1 |
Guest
Posts: n/a
|
Dear colleagues,
Would you be so kind to recommend me any Internets sources of literature (even not full texts, but abstarcts or just titles), devoted to the flows in the rivers with islands. Thanks in advance. Nina. |
|
January 8, 2001, 05:18 |
Re: Islands in rivers
|
#2 |
Guest
Posts: n/a
|
Check out shallow-water-modelling discussion on this site.
A few recent simulations are[list=1][*] Water currents in a river course[*] Transport and fate of toxic spill Regards Sergei Zhubrin |
|
January 12, 2001, 01:55 |
Re: Islands in rivers
|
#3 |
Guest
Posts: n/a
|
Well.. the information you have suggested is not proper, I think. Providing the examples implemented on commercial package is useless information. I think this site is not established for an advertisement of commercial CFD package.
Anyway, To Nina Yu. Shokina There is no difficulty in the simulation of flows of the river with island, if you want do. It is not different from the general river simulation problems. One thing different is that there are small closed solid boundaries in the domain. First, you generate grids on the domain which contains islands, and next, solve it via 2D shallow water equation solver. If you want to simulate drying/wetting on the island the problem beomces a little difficult, but it is also possible. Tsunami simulations can be a similar problem. Since there are so many papers concerning the river simulation, you can easily find it from Journal of Hydraulic Engineering, ASCE / Journal of Hyraulic Research, IAHR. Regards, Kang, Seok Koo Lab. of Hydraulic Eng., Department of Civil Engineering, Hanyang University, South Korea |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Suggestion for programe to simulate underwater turbines in rivers? | Milford30 | Main CFD Forum | 0 | May 23, 2011 07:24 |
Hardware required to model sediment dynamics in rivers using SSIIM | lindsaywestraadt | Hardware | 0 | August 12, 2010 11:18 |
anyone used star ccm+ to model rivers | R2DM | Siemens | 1 | July 27, 2009 04:55 |
Has anyone simulated rivers using PHOENICS | R2DM | Phoenics | 0 | June 2, 2009 17:17 |