|
[Sponsors] |
estimate boundary layer thickness of a 3D bluff body |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 6, 2011, 14:39 |
estimate boundary layer thickness of a 3D bluff body
|
#1 |
New Member
Martin R.
Join Date: Oct 2011
Posts: 7
Rep Power: 14 |
Hello all,
is there another way to estimate the boundary layer thickness of e.g. a 3D cube than by trial and error? Or some rule of thumb how to approach such a problem? The analytical equation for the flat plate doesn't make sense, unfortunately. Thanks in advance. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to set boundary layer of a moving body in GAMBIT to a mesh zone for dynamic mesh | tomyangbath | FLUENT | 18 | October 12, 2016 06:57 |
Wall coordinates and boundary layer thickness | bentmol | Main CFD Forum | 1 | July 3, 2011 20:44 |
Boundary layer thickness in Xfoil | Nixmich | Main CFD Forum | 5 | January 27, 2011 03:59 |
Best Way to Capture Boundary Layer Thickness | Gill | Main CFD Forum | 1 | October 23, 2008 07:06 |
Convective Heat Transfer - Heat Exchanger | Mark | CFX | 6 | November 15, 2004 15:55 |