Is anyone can help me with running simulation?

imnull · November 25, 2011, 14:27

Hi,
Usually we've been asked to validate a process simulation/s by measuring physical parameters of the process

.
Here, I would ask your help to simulate the process but the good part is that I do have parameters measured by physical methods and ready to share (pressure, temperature, nozzle geometry, calculated gas flow velocity, M number).

I'm not an expert in CFD so I need a help from someone who is willing to help and curious about the real process.

Pls text me If you willing to help with running the simulation of supersonic gas flow (Ideally I would like to publish a paper based of comparison of the real measured case and simulated case). fyi: measured case is ready and I willng to share, so i need a help with simulation part. Once the simulation will be verified there will be a chance to improve the real process.

Thanks and regards,
Dmitry

gocfd · November 28, 2011, 16:23

Hi Dmitry,

I have done some work on turbine blade optimization using CFD tools and at present working for a CFD consulting group. I would like to help you for above work. You can send me details of the problem you want to simulate. My email address is shah.harshu85@gmail.com

Regards,
Harsh Shah

November 25, 2011, 14:27	Is anyone can help me with running simulation?	#1
imnull Member Dmitry Join Date: Nov 2011 Posts: 45 Rep Power: 14	Hi, Usually we've been asked to validate a process simulation/s by measuring physical parameters of the process . Here, I would ask your help to simulate the process but the good part is that I do have parameters measured by physical methods and ready to share (pressure, temperature, nozzle geometry, calculated gas flow velocity, M number). I'm not an expert in CFD so I need a help from someone who is willing to help and curious about the real process. Pls text me If you willing to help with running the simulation of supersonic gas flow (Ideally I would like to publish a paper based of comparison of the real measured case and simulated case). fyi: measured case is ready and I willng to share, so i need a help with simulation part. Once the simulation will be verified there will be a chance to improve the real process. Thanks and regards, Dmitry

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
velocity profile export from a simulation onto another	sudhirlv	STAR-CCM+	1	September 12, 2010 18:57
Trying to stop CFX running mannually	cfxmar	CFX	8	August 27, 2010 11:00
Running Multiple Simulations from Workbench 12.1	Josh	CFX	3	August 10, 2010 19:51
Steps to be completed before running the simulation	Saha_AIT	STAR-CCM+	3	December 1, 2009 10:54
Replacing mesh while running a simulation	akultane	CFX	1	November 15, 2009 13:46

November 28, 2011, 16:23		#2
gocfd New Member Harsh Shah Join Date: Jul 2011 Posts: 4 Rep Power: 14	Hi Dmitry, I have done some work on turbine blade optimization using CFD tools and at present working for a CFD consulting group. I would like to help you for above work. You can send me details of the problem you want to simulate. My email address is shah.harshu85@gmail.com Regards, Harsh Shah