|
[Sponsors] |
|
May 12, 2016, 05:07 |
Mesh generation electronic passive cooling
|
#1 |
New Member
Nicola Guidi
Join Date: May 2016
Posts: 1
Rep Power: 0 |
I'm trying to create a mesh on imported file STEP geometry built with AUTOCAD.
I'm using the workbench application of Student Ansys Fleunt version 16.2. I'm new in use of this software and I want ask you some help to make a good quality mesh for my geometry. It consist in a natural convection / conduction problem. There are source of heat inside an enclosure filled with nitrogen. I simplify them with a cilindrical object (power supply) and a stack of electronic cards. These are put inside an alluminium chassis that is in contact with steel(housing). The housing is also sorrunded by dielectric oil to improve cooling. I'm looking for some advices in built a good mesh. I've tried with a tetrahedrons program controlled, with 100 of relevance but when I import it in fluent and I make the report quality, I notice that it is not so good. I can upload my CAD file and FLUENT Progect. I hope someone could help me! Thank you guys!! |
|
June 26, 2017, 01:49 |
Mesh Expert
|
#2 |
Member
sila
Join Date: Jul 2013
Posts: 32
Rep Power: 12 |
Hi,
Still you have this problem? Let me know, i can help you. Regards, sila |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
unstructured mesh generation with strictly constrained boundary in simple space | goujl | Mesh Generation & Pre-Processing | 0 | January 29, 2015 10:44 |
ISAAC code mesh generation | morteza08 | Main CFD Forum | 0 | June 15, 2012 09:26 |
3-d elliptic generation mesh | Gang Sun | Main CFD Forum | 5 | September 16, 1998 00:24 |