CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Special Topics > Mesh Generation & Pre-Processing

Regarding element size in (ansys 19.3)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 24, 2019, 12:32
Default Regarding element size in (ansys 19.3)
  #1
New Member
 
KIRAN
Join Date: Dec 2019
Posts: 1
Rep Power: 0
KIRAN B.D. is on a distinguished road
Recently i have come across a problem regarding to the mesh generation.
When i applied sizing and proceeded for element size to fill.there was a default value (8.09 in )but the value i wanted to input is .3 in so, how many times i tried its not getting corrected.do give your opinion regarding to stated issue.
KIRAN B.D. is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] 3D Mesh conversion from gmsh-2.5.0 to OpenFOAM Ancioi OpenFOAM Meshing & Mesh Conversion 17 January 9, 2019 00:50
How to confirm mesh element size at turbo grid? YOUNS CFX 2 April 25, 2018 10:27
Superlinear speedup in OpenFOAM 13 msrinath80 OpenFOAM Running, Solving & CFD 18 March 3, 2015 06:36
[ICEM] Help with fixing imported IGES model siw ANSYS Meshing & Geometry 24 August 24, 2010 12:22
Phase locked average in run time panara OpenFOAM 2 February 20, 2008 15:37


All times are GMT -4. The time now is 09:55.