|
[Sponsors] |
May 8, 2020, 19:34 |
Salome Shaper: TUI Recover Operation
|
#1 |
New Member
Carl Reilly
Join Date: Aug 2010
Posts: 26
Rep Power: 16 |
Hi,
I am trying to use the TUI to script some automated geometry creation in Shaper. I have imported two cubes (.step), then drawn some cylinders on one surface of the cube. We'll call this the "internal geometry". This geometry is then placed inside a large cube. I then do a cut operation to subtract the internal geometry from the large cube. The cut process consumes the internal geometry. In order to recover the internal geometry I use the Recover feature (model.addRecover) however I can't get it to work. It executes with no error, but does not recover the part. When i view the result in the GUI i see the action listed in the object tree, but is i select edit, i find that the geometry to recover check boxes are not checked. Am I using the wrong geometry definition? Has anyone else managed to successfully use the recover command with the TUI. I've attached my script and files which should be relatively easy to follow. Note the .TXT needs removing from the .py and .STEP files. I'm struggling to find any help in the documentation. Also I can't seem to gain access to the Salome Forum, as I've not had a response to my email requesting an user name. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
loading issue libraries:libsimpleFunctionObjects.so libsimpleSwakFunctionObjects.so | immortality | OpenFOAM Pre-Processing | 15 | April 7, 2024 13:35 |
[Salome] SALOME and Partition operation problems | kandelabr | OpenFOAM Meshing & Mesh Conversion | 8 | April 28, 2021 21:40 |
Salome Error Importing .step to Shaper > Geom > Mesh | carl_r | Mesh Generation & Pre-Processing | 1 | May 8, 2020 00:03 |
OpenFoam "Permission denied" and "command not found" problems. | iyidaniel@yahoo.co.uk | OpenFOAM Running, Solving & CFD | 11 | January 2, 2018 07:47 |
Incompatible dimensions for operation | ruben23 | OpenFOAM Running, Solving & CFD | 2 | June 12, 2015 05:14 |