[Doug68]

So I have an operating setup of Bluecapes port of OF2.1 running just fine including running in parallel on Windows 7 64.
So I'm trying to setup another machine in exactly the same way, except clearly I am screwing something up as I get the error message below in the log files when trying to run a job in parallel.

BTW the Windows firewall is totally disabled on this machine, so that should not be an issue, I believe I've followed the step in the user documentation, but clearly I am doing this wrong. Its frustrating as I've been through this once and solved it already and from memory its was an easy thing to do.

AQny help is appreciated.


C:\BLUECF~1.1\msys\home\ofuser>mpirun -n 4 -x HOME -x PATH -x USERNAME -x WM_PROJECT_DIR -x WM_PROJECT_INST_DIR -x WM_OPTIONS -x FOAM_LIBBIN -x FOAM_APPBIN -x FOAM_USER_APPBIN -x MPI_BUFFER_SIZE 5131088.bat
[WIN-UEDH712LCQI:01756] [[2578,0],0] ORTE_ERROR_LOG: Error in file ..\..\..\openmpi-1.5.3\orte\mca\ess\hnp\ess_hnp_module.c at line 214
[WIN-UEDH712LCQI:01756] [[2578,0],0] ORTE_ERROR_LOG: Error in file ..\..\..\openmpi-1.5.3\orte\runtime\orte_init.c at line 128
--------------------------------------------------------------------------
It looks like orte_init failed for some reason; your parallel process is
likely to abort. There are many reasons that a parallel process can
fail during orte_init; some of which are due to configuration or
environment problems. This failure appears to be an internal failure;
here's some additional information (which may only be relevant to an
Open MPI developer):

orte_rml_base_select failed
--> Returned value Error (-1) instead of ORTE_SUCCESS
--------------------------------------------------------------------------
[WIN-UEDH712LCQI:01756] [[2578,0],0] ORTE_ERROR_LOG: Error in file ..\..\..\..\..\openmpi-1.5.3\orte\tools\orterun\orterun.c at line 572
--------------------------------------------------------------------------
It looks like orte_init failed for some reason; your parallel process is
likely to abort. There are many reasons that a parallel process can
fail during orte_init; some of which are due to configuration or
environment problems. This failure appears to be an internal failure;
here's some additional information (which may only be relevant to an
Open MPI developer):

orte_ess_set_name failed
--> Returned value Error (-1) instead of ORTE_SUCCESS
--------------------------------------------------------------------------