|
[Sponsors] |
February 24, 2014, 13:18 |
ccm26ToFOAM problem
|
#1 |
New Member
gao
Join Date: Feb 2014
Posts: 7
Rep Power: 12 |
Hi,
I installed the OpenFOAM-2.2.0 in Ubuntu12.04 and ccm26ToFOAM, it gives an error Can someone tell me what is wrong? It is installed in /home/gao/OpenFOAM/gao-2.2.0/platforms/linux64GccDPOpt/bin/ccm26ToFoam I tested with OpenFOAM-2.3.0 and got the same results. Thank you very much! Best regards Zhenlan gao@A:~/Documents$ ccm26ToFoam test1.ccm /*---------------------------------------------------------------------------*\ | ========= | | | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox | | \\ / O peration | Version: 2.2.0 | | \\ / A nd | Web: www.OpenFOAM.org | | \\/ M anipulation | | \*---------------------------------------------------------------------------*/ Build : 2.2.0-5be49240882f Exec : ccm26ToFoam test1.ccm Date : Feb 24 2014 Time : 19:09:11 Host : "A" PID : 1928 Case : /home/gao/Documents nProcs : 1 sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE). fileModificationChecking : Monitoring run-time modified files using timeStampMaster allowSystemOperations : Disallowing user-supplied system call operations // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // Create time --> FOAM FATAL IO ERROR: cannot find file file: /home/gao/Documents/system/controlDict at line 0. From function regIOobject::readStream() in file db/regIOobject/regIOobjectRead.C at line 73. FOAM exiting |
|
March 31, 2014, 14:11 |
|
#2 |
Member
Petr Furmanek
Join Date: Jan 2012
Location: Faenza, Italy
Posts: 66
Rep Power: 14 |
Hi Zhenlan, when using the ccm26ToFoam utility you have to prepare the whole case (without the mesh of course), i.e. your case directory should contain 0, constant and system sub-directories including all the files as controlDict etc.
|
|
March 31, 2014, 14:53 |
|
#3 |
New Member
gao
Join Date: Feb 2014
Posts: 7
Rep Power: 12 |
Hi, Petr
Thank you for your reply. I figured it out several days later, after I posted the question here. Indeed, we need to create a whole case. I downloaded a file tar.gz in the forum, and copy the mesh in the folder, then it works. Thank you again. Cheers Zhenlan |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
BuoyantBoussinesqSimpleFoam_Facing problem | Mondal131211 | OpenFOAM Running, Solving & CFD | 1 | April 10, 2019 19:41 |
UDF compiling problem | Wouter | Fluent UDF and Scheme Programming | 6 | June 6, 2012 04:43 |
natural convection problem for a CHT problem | Se-Hee | CFX | 2 | June 10, 2007 06:29 |
Adiabatic and Rotating wall (Convection problem) | ParodDav | CFX | 5 | April 29, 2007 19:13 |
Is this problem well posed? | Thomas P. Abraham | Main CFD Forum | 5 | September 8, 1999 14:52 |