|
[Sponsors] |
[Commercial meshers] How to STAR-CCM+ Mesh to OpenFoam |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 28, 2016, 03:07 |
How to STAR-CCM+ Mesh to OpenFoam
|
#1 |
Senior Member
Ramakant Gadhewal
Join Date: Apr 2010
Location: Chemical Engineering,National Institute of Technology,Warangal (T.S.),India
Posts: 130
Rep Power: 16 |
Dear All
I need your help in this regards how to open STAR-CCM+ Mesh file into Ansys Fluent. I want to STAR-CCM+ Mesh to OpenFoam and then OpenFOAM to Fluent. thank you Last edited by ramakant; March 28, 2016 at 04:31. |
|
March 28, 2016, 10:56 |
|
#2 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Quick answer - Installation instructions for ccm26ToFoam are now available here: https://github.com/wyldckat/localCCM26ToFOAM
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
decomposePar problem: Cell 0contains face labels out of range | vaina74 | OpenFOAM Pre-Processing | 37 | July 20, 2020 05:38 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
problem when imported geometry from 3D CAD to star ccm, | TAREK GANAT | STAR-CCM+ | 1 | May 21, 2013 22:15 |
salome, openfoam and moving mesh | prhlava | OpenFOAM Running, Solving & CFD | 8 | November 9, 2009 08:59 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |