CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[snappyHexMesh] snappyHexMesh error "Cannot determine normal vector from patches."

Register Blogs Community New Posts Updated Threads Search

Like Tree2Likes
  • 1 Post By lethu
  • 1 Post By otaolafr

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 10, 2017, 04:15
Default snappyHexMesh error "Cannot determine normal vector from patches."
  #1
New Member
 
Kim Le
Join Date: May 2016
Location: Lyon, France
Posts: 21
Rep Power: 9
lethu is on a distinguished road
Hello everyone,

I am trying to run snappy on my STL files but I have this error message.
Apparently, it cannot find "Cannot determine normal vector from patches"
I have already check the concerned twoDPointCorrector.C file and it comes from this :
Code:
if (mag(pn) < VSMALL)
    {
        FatalErrorInFunction
            << "Cannot determine normal vector from patches."
            << abort(FatalError);
    }
    else
    {
        pn /= mag(pn);
    }


This is the error I get :
Code:
Checking initial mesh ...
Checking faces in error :
    non-orthogonality > 65  degrees                        : 0
    faces with face pyramid volume < 1e-13                 : 0
    faces with face-decomposition tet quality < 1e-15      : 0
    faces with concavity > 80  degrees                     : 0
    faces with skewness > 4   (internal) or 20  (boundary) : 0
    faces with interpolation weights (0..1)  < 0.02        : 0
    faces with volume ratio of neighbour cells < 0.01      : 0
    faces with face twist < 0.02                           : 0
    faces on cells with determinant < 0.001                : 0
Detected 0 illegal faces (concave, zero area or negative cell pyramid volume)
Checked initial mesh in = 0.28 s


Smoothing patch points ...
Smoothing iteration 0
Found 0 non-manifold point(s).

Scaling iteration 0
Moving mesh using displacement scaling : min:1  max:1
Correcting 2-D mesh motion--> FOAM Warning : 
[3] [4] 
[4] 
[4] --> FOAM FATAL ERROR: 
[4] Cannot determine normal vector from patches.
[4] 
[4]     From function void Foam::twoDPointCorrector::calcAddressing() const
[4]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.[5] 
[5] 
[5] --> FOAM FATAL ERROR: 
[5] Cannot determine normal vector from patches.
[5] 
[5]     From function void Foam::twoDPointCorrector::calcAddressing() const
[5]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.
[5] 
FOAM parallel run aborting
[6] 
[6] 
[6] --> FOAM FATAL ERROR: 
[6] Cannot determine normal vector from patches.
[6] 
[6]     From function void Foam::twoDPointCorrector::calcAddressing() const
[6]     in file twoDPointCorrector/twoDPointCorrector.C at line 105[7] 
[7] 
[7] --> FOAM FATAL ERROR: 
[7] Cannot determine normal vector from patches.
[7] 
[7]     From function void Foam::twoDPointCorrector::calcAddressing() const
[7]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.
[7] 
FOAM parallel run aborting
[7] 
[8] 
[8] 
[8] --> FOAM FATAL ERROR: 
[8] Cannot determine normal vector from patches.
[8] 
[8]     From function void Foam::twoDPointCorrector::calcAddressing() const
[8]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.
[8] 
FOAM parallel run aborting
[8] 
[9] 
[9] 
[9] --> FOAM FATAL ERROR: 
[9] Cannot determine normal vector from patches.
[9] 
[9]     From function void Foam::twoDPointCorrector::calcAddressing() const
[9]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.
[9] 
FOAM parallel run aborting
[9] 
[10] 
[10] 
[10] --> FOAM FATAL ERROR: 
[10] Cannot determine normal vector from patches.
[10] 
[10]     From function void Foam::twoDPointCorrector::calcAddressing() const
[10]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.
[10] 
FOAM parallel run aborting
[10] 
[11] 
[11] 
[11] --> FOAM FATAL ERROR: 
[11] Cannot determine normal vector from patches.
[11] 
[11]     From function void Foam::twoDPointCorrector::calcAddressing() const
[11]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.
[11] 
FOAM parallel run aborting
[11] 
[12] 
[12] 
[12] --> FOAM FATAL ERROR: 
[12] Cannot determine normal vector from patches.
[12] 
[12]     From function void Foam::twoDPointCorrector::calcAddressing() const
[12]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.
[12] 
FOAM parallel run aborting
[12] 
[13] 
[13] 
[13] --> FOAM FATAL ERROR: 
[13] Cannot determine normal vector from patches.
[13] 
[13]     From function void Foam::twoDPointCorrector::calcAddressing() const
[13]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.
[13] 
FOAM parallel run aborting
[13] 
[14] 
[14] 
[14] --> FOAM FATAL ERROR: 
[14] Cannot determine normal vector from patches.
[14] 
[14]     From function void Foam::twoDPointCorrector::calcAddressing() const
[14]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.
[14] 
FOAM parallel run aborting
[14] 
[15] 
[15] 
[15] --> FOAM FATAL ERROR: 
[15] Cannot determine normal vector from patches.
[15] 
[15]     From function void Foam::twoDPointCorrector::calcAddressing() const
[15]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.
[15] 
FOAM parallel run aborting
[15] 
[2] 
[2] 
[2] --> FOAM FATAL ERROR: 
[2] Cannot determine normal vector from patches.
[2] 
[2]     From function void Foam::twoDPointCorrector::calcAddressing() const
[2]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.
[2] 
FOAM parallel run aborting
[2] 
[1] 
[1] 
[1] --> FOAM FATAL ERROR: 
[1] Cannot determine normal vector from patches.
[1] 
[1]     From function void Foam::twoDPointCorrector::calcAddressing() const
[1]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.
[1] 
FOAM parallel run aborting
[1] 

[3] 
[3] --> FOAM FATAL ERROR: 
[3] Cannot determine normal vector from patches.
[3] 
[3]     From function void Foam::twoDPointCorrector::calcAddressing() const
[3]     in file twoDPointCorrector/twoDPointCorrector.C at line 105.
[3] 
FOAM parallel run aborting
[3] 

[4] 
FOAM parallel run aborting
[4] 
[5] 
.
[6] 
FOAM parallel run aborting
[6] 
[2] #0  Foam::error::printStack(Foam::Ostream&)[1] #0  Foam::error::printStack(Foam::Ostream&)[15] #0  Foam::error::printStack(Foam::Ostream&)[3] #0  Foam::error::printStack(Foam::Ostream&)[4] #0  Foam::error::printStack(Foam::Ostream&)[5] #0  Foam::error::printStack(Foam::Ostream&)[7] #0  Foam::error::printStack(Foam::Ostream&)[8] #0  Foam::error::printStack(Foam::Ostream&)[9] #0  Foam::error::printStack(Foam::Ostream&)[10] #0  Foam::error::printStack(Foam::Ostream&)[11] #0  Foam::error::printStack(Foam::Ostream&)[12] #0  Foam::error::printStack(Foam::Ostream&)[13] #0  Foam::error::printStack(Foam::Ostream&)[14] #0  Foam::error::printStack(Foam::Ostream&)[6] #0  Foam::error::printStack(Foam::Ostream&)    From function void Foam::motionSmootherAlgo::modifyMotionPoints(Foam::pointField&) const
    in file motionSmoother/motionSmootherAlgo.C at line 657
    2D mesh-motion probably not correct in parallel
--> FOAM Warning : 
    From function void Foam::twoDPointCorrector::calcAddressing() const
    in file twoDPointCorrector/twoDPointCorrector.C at line 160
    The number of points in the mesh is not equal to twice the number of edges normal to the plane - this may be OK only for wedge geometries.
    Please check the geometry or adjust the orthogonality tolerance.

Number of normal edges: 33396 number of points: 34348
 ...done
 at ??:?
 at ??:?
 at ??:?
 at ??:?
 at ??:?
[11] #1  Foam::error::abort() at ??:?
 at ??:?
[3] #1  Foam::error::abort()[6] #1  [14] #1  Foam::error::abort()Foam::error::abort()[12] #1   at ??:?
Foam::error::abort() at ??:?
 at ??:?
[8] #1  Foam::error::abort()[10] #1  Foam::error::abort() at ??:?
[5] #1  Foam::error::abort()[1] #1  Foam::error::abort()[9] #1  Foam::error::abort()[7] #1  Foam::error::abort() at ??:?
 at ??:?
[2] #1  Foam::error::abort()[4] #1  Foam::error::abort() at ??:?
[13] #1  Foam::error::abort() at ??:?
[15] #1  Foam::error::abort() at ??:?
[11] #2  Foam::twoDPointCorrector::calcAddressing() const at ??:?
 at ??:?
[5] #2  Foam::twoDPointCorrector::calcAddressing() const[9] #2  Foam::twoDPointCorrector::calcAddressing() const at ??:?
 at ??:?
 at ??:?
[10] #2  [8] #2  Foam::twoDPointCorrector::calcAddressing() const[14] #2  Foam::twoDPointCorrector::calcAddressing() constFoam::twoDPointCorrector::calcAddressing() const at ??:?
[6] #2  Foam::twoDPointCorrector::calcAddressing() const at ??:?
 at ??:?
[7] #2  Foam::twoDPointCorrector::calcAddressing() const[12] #2  Foam::twoDPointCorrector::calcAddressing() const at ??:?
[1] #2  Foam::twoDPointCorrector::calcAddressing() const at ??:?
 at ??:?
[2] #2  Foam::twoDPointCorrector::calcAddressing() const[4] #2  Foam::twoDPointCorrector::calcAddressing() const at ??:?
[3] #2  Foam::twoDPointCorrector::calcAddressing() const at ??:?
[13] #2  Foam::twoDPointCorrector::calcAddressing() const at ??:?
 at ??:?
[9] #3  Foam::twoDPointCorrector::normalEdgeIndices() const[11] #3  Foam::twoDPointCorrector::normalEdgeIndices() const at ??:?
[14] #3  Foam::twoDPointCorrector::normalEdgeIndices() const at ??:?
[6] #3  Foam::twoDPointCorrector::normalEdgeIndices() const at ??:?
 at ??:?
 at ??:?
[5] #3  Foam::twoDPointCorrector::normalEdgeIndices() const[15] #2  Foam::twoDPointCorrector::calcAddressing() const[12] #3  Foam::twoDPointCorrector::normalEdgeIndices() const at ??:?
[2] #3  Foam::twoDPointCorrector::normalEdgeIndices() const at ??:?
[7] #3  Foam::twoDPointCorrector::normalEdgeIndices() const at ??:?
 at ??:?
[10] #3  Foam::twoDPointCorrector::normalEdgeIndices() const[8] #3  Foam::twoDPointCorrector::normalEdgeIndices() const at ??:?
[4] #3  Foam::twoDPointCorrector::normalEdgeIndices() const at ??:?
[1] #3  Foam::twoDPointCorrector::normalEdgeIndices() const at ??:?
[3] #3  Foam::twoDPointCorrector::normalEdgeIndices() const at ??:?
[13] #3  Foam::twoDPointCorrector::normalEdgeIndices() const at ??:?
[5] #4  Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const at ??:?
 at ??:?
[11] #4  [9] #4  Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) constFoam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const at ??:?
[15] #3  Foam::twoDPointCorrector::normalEdgeIndices() const at ??:?
 at ??:?[14] #4  
 at ??:?
Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const[2] #4  Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const[6] #4  Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const at ??:?
[8] #4   at ??:?
Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const[4] #4  Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const at ??:?
[7] #4  Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const at ??:?
[12] #4  Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const at ??:?
[10] #4  Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const at ??:?
[1] #4  Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const at ??:?
[13] #4  Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const at ??:?
[3] #4  Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const at ??:?
 at ??:?
[5] #5  Foam::motionSmootherAlgo::curPoints() const[9] #5  Foam::motionSmootherAlgo::curPoints() const at ??:?
[15] #4  Foam::motionSmootherAlgo::modifyMotionPoints(Foam::Field<Foam::Vector<double> >&) const at ??:?
[11] #5  Foam::motionSmootherAlgo::curPoints() const at ??:?
 at ??:?
 at ??:?
[8] #5  Foam::motionSmootherAlgo::curPoints() const[6] #5  Foam::motionSmootherAlgo::curPoints() const[4] #5  Foam::motionSmootherAlgo::curPoints() const at ??:?
[2] #5  Foam::motionSmootherAlgo::curPoints() const at ??:?
 at ??:?
[7] #5  Foam::motionSmootherAlgo::curPoints() const[14] #5  Foam::motionSmootherAlgo::curPoints() const at ??:?
[1] #5  Foam::motionSmootherAlgo::curPoints() const at ??:?
[10] #5  Foam::motionSmootherAlgo::curPoints() const at ??:?
[12] #5  Foam::motionSmootherAlgo::curPoints() const at ??:?
[3] #5  Foam::motionSmootherAlgo::curPoints() const at ??:?
 at ??:?
[5] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int)[13] #5  Foam::motionSmootherAlgo::curPoints() const at ??:?
[11] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int) at ??:?
[9] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int) at ??:?
[8] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int) at ??:?
[2] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int) at ??:?
 at ??:?
[14] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int)[6] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int) at ??:?
[4] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int) at ??:?
 at ??:?
[7] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int)[1] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int) at ??:?
[10] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int) at ??:?
 at ??:?
[3] #6  [15] #5  Foam::motionSmootherAlgo::curPoints() constFoam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int) at ??:?
 at ??:?
[5] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int)[13] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int) at ??:?
[12] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int) at ??:?
[11] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int) at ??:?
[2] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int) at ??:?
 at [14] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int)??:?
[6] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int) at ??:?
[8] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int) at ??:?
[1] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int) at ??:?
[7] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int) at ??:?
[3] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int) at ??:?
[5] #8  Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&) at ??:?
[13] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int) at ??:?
 at ??:?
[15] #6  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, Foam::dictionary const&, Foam::dictionary const&, bool, int)[4] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int) at ??:?
[10] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int) at ??:?
[9] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int) at ??:?
 at ??:?
[11] #8  Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&)[12] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int) at ??:?
[14] #8  Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&) at ??:?
[8] #8  Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&) at ??:?
[2] #8  Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&) at ??:?
[1] #8  Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&) at ??:?
[6] #8  Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&) at ??:?
[5] #9  Foam::snappySnapDriver::doSnap(Foam::dictionary const&, Foam::dictionary const&, double, double, Foam::snapParameters const&) at ??:?
[7] #8  Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&) at ??:?
[13] #8  Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&) at ??:?
[15] #7  Foam::motionSmootherAlgo::scaleMesh(Foam::List<int>&, Foam::List<Foam::Pair<int> > const&, bool, int) at ??:?
[3] #8  Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&) at ??:?
[4] #8  Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&) at ??:?
[10] #8  Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&) at ??:?
[9] #8   at ??:?
Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&)[11] #9  Foam::snappySnapDriver::doSnap(Foam::dictionary const&, Foam::dictionary const&, double, double, Foam::snapParameters const&) at ??:?
 at ??:?
[8] #9  Foam::snappySnapDriver::doSnap(Foam::dictionary const&, Foam::dictionary const&, double, double, Foam::snapParameters const&)[2] #9  Foam::snappySnapDriver::doSnap(Foam::dictionary const&, Foam::dictionary const&, double, double, Foam::snapParameters const&) at ??:?
[12] #8  Foam::snappySnapDriver::preSmoothPatch(Foam::meshRefinement const&, Foam::snapParameters const&, int, Foam::List<Foam::Pair<int> > const&, Foam::motionSmoother&) at ??:?
[5] #10   at ??:?


etc......

Does anyone has any clue ?
Thanks for helping !
lourencosm likes this.
lethu is offline   Reply With Quote

Old   June 3, 2020, 07:49
Default
  #2
Senior Member
 
Franco
Join Date: Nov 2019
Location: Compiègne, France
Posts: 129
Rep Power: 6
otaolafr is on a distinguished road
i am having the same issue! did you solved?
best regards.
lourencosm likes this.
otaolafr is offline   Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] Patches disappearing after snappyHexMesh obiscolly50 OpenFOAM Meshing & Mesh Conversion 3 April 14, 2023 13:24
[snappyHexMesh] Snappy fails to create layers johny OpenFOAM Meshing & Mesh Conversion 5 November 6, 2020 07:13
How to determine the direction of cell face vectors on processor patches sebastian_vogl OpenFOAM Programming & Development 1 October 11, 2016 13:17
[snappyHexMesh] snappyHexMesh does not create boundary patches from .stl files bug_or_feature OpenFOAM Meshing & Mesh Conversion 7 August 30, 2016 19:18
How to determine the direction of cell face vectors on processor patches sebastian_vogl OpenFOAM Running, Solving & CFD 0 October 27, 2009 08:47


All times are GMT -4. The time now is 14:40.