Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Meshing & Mesh Conversion

[blockMesh] Mesh conversion from Star CCM+ to OpenFOAM

Updated Threads

Search this Thread

Prev

Previous Post

Next Post

Next

July 20, 2021, 08:08	Mesh conversion from Star CCM+ to OpenFOAM	#1
mbbb New Member murchana Join Date: Jul 2018 Posts: 5 Rep Power: 7	Hello. I would like to know how to convert a .sim file generated in star ccm+ (having a 3d mesh as well as boundary conditions set) into a OpenFOAM readable file. I am a complete beginer in OpemFOAM as well as Star ccm+. Basically i would like to know how to convert a 3d mesh generated in star ccm+ to OpemFOAM.

Tags

.sim, openfoam mesh, star ccm+ mesh

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Salome] mesh conversion Salome --> OpenFoam	vaina74	OpenFOAM Meshing & Mesh Conversion	42	March 4, 2022 20:41
[Commercial meshers] Mesh conversion .gtm to OpenFOAM	ansab	OpenFOAM Meshing & Mesh Conversion	2	December 6, 2016 13:48
Star CCM Overset Mesh Error (Rotating Turbine)	thezack	Siemens	7	October 12, 2016 11:14
[Commercial meshers] Problems with ANSYS mesh conversion	tdog	OpenFOAM Meshing & Mesh Conversion	1	March 31, 2016 17:36
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55

All times are GMT -4. The time now is 06:11.