|
[Sponsors] |
[blockMesh] Mesh conversion from Star CCM+ to OpenFOAM |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 8, 2022, 06:46 |
|
#5 |
Senior Member
Mark Olesen
Join Date: Mar 2009
Location: https://olesenm.github.io/
Posts: 1,695
Rep Power: 40 |
Attempt to export as a proSTAR mesh (if possible) and use star4ToFoam. Alternatively, there are a variety of ccmToFoam, foamToCcm etc tools in the www.openfoam.com version (ie, from OpenCFD Ltd, not from OpenFOAM Foundation Ltd), but these will still require that you have access to the base-level libccmio library (proprietary).
|
|
Tags |
.sim, openfoam mesh, star ccm+ mesh |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Salome] mesh conversion Salome --> OpenFoam | vaina74 | OpenFOAM Meshing & Mesh Conversion | 42 | March 4, 2022 20:41 |
[Commercial meshers] Mesh conversion .gtm to OpenFOAM | ansab | OpenFOAM Meshing & Mesh Conversion | 2 | December 6, 2016 13:48 |
Star CCM Overset Mesh Error (Rotating Turbine) | thezack | Siemens | 7 | October 12, 2016 11:14 |
[Commercial meshers] Problems with ANSYS mesh conversion | tdog | OpenFOAM Meshing & Mesh Conversion | 1 | March 31, 2016 17:36 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |