|
[Sponsors] |
[snappyHexMesh] Maintain patchs in interior mesh for SHM in multiRegion |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 26, 2022, 06:40 |
Maintain patchs in interior mesh for SHM in multiRegion
|
#1 |
New Member
Join Date: Mar 2022
Posts: 24
Rep Power: 4 |
Hello to all,
I have the following example geometry: Where a fluid domain is inside a solid domain. https://ibb.co/g7HPVp3 When I generate a mesh with SHM, all of the patches in the fluid region are transformed into e.g., "fluid_to_solid". Is it possible to main the patches and have: inlet_to_solid. outlet_to_solid, walls_to_solid? Kind regards |
|
May 26, 2022, 11:56 |
|
#2 |
New Member
Join Date: Mar 2022
Posts: 24
Rep Power: 4 |
Ok.. Not ideal but I was able to get my patches with topoSet.
Example: Code:
actions ( { // Mandatory (inherited) entries name outlet; type faceZoneSet; action new; // Mandatory entries source searchableSurfaceToFaceZone; surfaceType triSurfaceMesh; surfaceName outlet.stl; } { // Mandatory (inherited) entries name fluid_to_solid; type faceZoneSet; action delete; // Mandatory entries source searchableSurfaceToFaceZone; surfaceType triSurfaceMesh; surfaceName outlet.stl; } ); |
|
January 18, 2023, 13:37 |
|
#3 |
New Member
Join Date: Mar 2022
Posts: 24
Rep Power: 4 |
Anyone with a better solution for this?
|
|
|
|