 |
 |
 |
|
|
|
[Sponsors] | ||||
[mesh manipulation] Different mesh morphing in different cell zones |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 12, 2023, 08:24
|
Different mesh morphing in different cell zones
|
#1 |
|
New Member
Something Random
Join Date: Jul 2022
Posts: 5
Rep Power: 3  |
I want to use two different mesh morphing techniques (directional and quadratic inverseDistance), but when I define them twice (different cell zones) using multi motion solver, one of the faces does not move at all (simulation over a plate, the upper face moves, the lower face does not).
Is it not possible at all or there has been some mistake in my part? |
|
|
|
|
|
| Tags |
| mesh morphing |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [mesh manipulation] how should we remove the Concave cells from the mesh? | s.m | OpenFOAM Meshing & Mesh Conversion | 20 | March 5, 2020 16:35 |
| [mesh manipulation] How to write cellSet for different regions in constant/polyMesh/sets | Struggle_Achieve | OpenFOAM Meshing & Mesh Conversion | 3 | June 17, 2019 09:29 |
| Simulating fire in a tunnel | luca1992 | OpenFOAM | 14 | August 16, 2017 13:50 |
| [snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
| [Other] Mesh quality | vitorspadetoventurin | OpenFOAM Meshing & Mesh Conversion | 0 | November 28, 2014 18:27 |
Linear Mode
