Converting .txt files into .stl -- CFD Online Discussion Forums

November 8, 2015, 14:05	Converting .txt files into .stl	#1
CaglarCoskun New Member Çağlar Coşkun Join Date: Feb 2012 Posts: 20 Rep Power: 14	Hello everyone I have 2-D coordinates of a hill from N-S, E-W, NE-SW, NW-SE sections as .txt files. I have to do 2-D CFD analyses of wind flow over this hill from these sections in OpenFOAM. To import the geometry into OpenFOAM as .stl file and mesh with snappyHexMesh, I need to convert these text files containing section coordinates into .stl files. I am having trouble about this conversion. How can I do this? Thanks in advance for your helps.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Converting Fluent mesh files to Gambit neutral files	samuelkc	ANSYS Meshing & Geometry	9	April 21, 2021 06:28
Compiled library vs. inInclude Files, DSMC solver crashes after run	GPesch	OpenFOAM Programming & Development	8	April 18, 2013 07:17
critical error during installation of openfoam	Fabio88	OpenFOAM Installation	21	June 2, 2010 03:01
Results saving in CFD	hawk	Main CFD Forum	16	July 21, 2005 20:51
How to read .stl files with gambit 2.0 ?	Lio	FLUENT	6	July 1, 2004 07:39

All times are GMT -4. The time now is 20:16.