|
[Sponsors] |
Dynamic Mesh Capability in reactingFoam - correctPhi.H |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 30, 2013, 01:16 |
Dynamic Mesh Capability in reactingFoam - correctPhi.H
|
#1 |
New Member
Joel C Lisanti
Join Date: Feb 2013
Posts: 5
Rep Power: 13 |
Hello,
I am new to development in OpenFOAM but have some experience with writing CFD codes (basic graduate level) and C++ programming. My objective is to create a combustion solver with dynamic mesh capability by modifying the reactingFoam solver. My goal is to model a rotating ball valve in a pulsed combustor. Effectively, what I have done so far is follow the basic method used in the rhoPimpleDyMFoam. This seems fairly straight forward...I think. Where I am stuck is writing the correctPhi.H file. If anyone could provide any insight on how to properly write this part of the solver I would most appreciate it. Please let me know if I have missed other resources I should have gone to first. Thank you for your time and any assistance you may be able to provide. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dynamic Mesh on Pintle type injector. | herntan | FLUENT | 16 | September 4, 2020 08:27 |
pls help. mesh collapsed with dynamic mesh. | wlt_1985 | FLUENT | 2 | May 7, 2020 10:42 |
ReactingFoam & Dynamic Mesh | yaqb | OpenFOAM Running, Solving & CFD | 4 | July 1, 2013 12:30 |
Dynamic Mesh "Shadow Wall" | thezack | FLUENT | 0 | June 4, 2013 22:09 |
dynamic mesh for drop interface | IndrajitW | FLUENT | 0 | March 30, 2013 08:03 |