|
[Sponsors] |
May 23, 2012, 11:17 |
interDyMFOAM with moving mesh
|
#1 |
Member
bojiezhang
Join Date: Jan 2010
Posts: 64
Rep Power: 16 |
hello every former:
I use interDyMFOAM with moving mesh(displacementLaplacian), and I use the pointDisplacement to control the boundary motion. when I set a small displacement for one boundary, at the first time step, all is ok and the internal mesh move formally. but at the second time step, I find the mesh on the boundary distorted, and the internal mesh certainly also distorted. At the same time, the courant number become very large and the caculation terminated. I feel confused if the displacementLaplacian is credible, for it can not be applied for such a small displacement. Hope someone could tell me if I did something wrong. Thank you! bojiezhang |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
3D Hybrid Mesh Errors | DarrenC | ANSYS Meshing & Geometry | 11 | August 5, 2013 06:42 |
Dynamic Mesh moving interface help | akash.iitb | FLUENT | 0 | August 23, 2010 23:53 |
Resisting torque on a moving mesh | floooo | OpenFOAM | 3 | March 29, 2010 20:18 |
[snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 19:43 |