Why "keyword PISO is undefined"

BenXiaoDou · March 13, 2016, 07:48

Hello,
I am really new to OpenFOAM. After installing, I tried to run the cylinder case in tutorials/basic/potentialFoam/cylinder. The blockMesh part went well, but after icoMesh command, the terminal showed:

Create time

Create mesh for time = 0

--> FOAM FATAL IO ERROR:
keyword PISO is undefined in dictionary "/home/xie/OpenFOAM/xie-3.0.1/run/tutorials/basic/potentialFoam/cylinder/system/fvSolution"

file: /home/xie/OpenFOAM/xie-3.0.1/run/tutorials/basic/potentialFoam/cylinder/system/fvSolution from line 22 to line 41.

From function dictionary::subDict(const word& keyword) const
in file db/dictionary/dictionary.C at line 648.

FOAM exiting

I have no idea why this is happening. I would appreciate any help.

PS: My Ubuntu are totally newly installed. No software has been installed before OpenFOAM. Also, the case cavity went well without any problem. I do not understand why cylinder case is different.

wyldckat · March 13, 2016, 19:02

Quick answer - Read this FAQ: How to run the tutorials in OpenFOAM?

March 13, 2016, 07:48	Why "keyword PISO is undefined"	#1
BenXiaoDou New Member Xie Join Date: Mar 2016 Posts: 1 Rep Power: 0	Hello, I am really new to OpenFOAM. After installing, I tried to run the cylinder case in tutorials/basic/potentialFoam/cylinder. The blockMesh part went well, but after icoMesh command, the terminal showed: Create time Create mesh for time = 0 --> FOAM FATAL IO ERROR: keyword PISO is undefined in dictionary "/home/xie/OpenFOAM/xie-3.0.1/run/tutorials/basic/potentialFoam/cylinder/system/fvSolution" file: /home/xie/OpenFOAM/xie-3.0.1/run/tutorials/basic/potentialFoam/cylinder/system/fvSolution from line 22 to line 41. From function dictionary::subDict(const word& keyword) const in file db/dictionary/dictionary.C at line 648. FOAM exiting I have no idea why this is happening. I would appreciate any help. PS: My Ubuntu are totally newly installed. No software has been installed before OpenFOAM. Also, the case cavity went well without any problem. I do not understand why cylinder case is different.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
interDyMFoam "keyword displacementLaplacianCoeffs is undefined"	kilroy	OpenFOAM Running, Solving & CFD	3	May 1, 2013 10:57
Non-linearity Pressure Equation -- PISO algorithm	gdeneyer	OpenFOAM Programming & Development	1	August 23, 2012 05:19
Development of a Low mach PISO solver	nishant_hull	OpenFOAM Programming & Development	0	August 25, 2009 12:48
PISO 50 with discarge coeff down???	Andrea	Siemens	1	February 1, 2008 13:33
PISO vs. SIMPLE	benedikt flurl	Main CFD Forum	2	April 14, 2005 06:54

March 13, 2016, 19:02		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Quick answer - Read this FAQ: How to run the tutorials in OpenFOAM?