rotorDiskSource- Actuator Disc

arjun14 · June 6, 2015, 02:07

Dear FOAMers

I have been trying to simulate the effect of propeller via actuator disc. I have been successful in applying the new FVoption function actuationdiscsource.

However, I want to couple it with blade element theory. I believe that the FVoption function rotorDiscSource does that. I am not able to figure out how to enter the blade details such as chord and twist distribution and also the aerofoil details at each section. Is anyone aware of this function?

I am fairly new to OpenFOAM and also C++, so I would appreciate if anyone could provide any suggestion.

Thanks

Arjun

wyldckat · September 20, 2015, 07:49

Greetings Arjun,

I've had this thread on my to-do list for quite some time now and only now was I able to quickly look into this.

There are already a few threads on this topic, but I can't find any example to work with, therefore I can't help much further than pointing out at least the following threads:

If you have not yet solved this issue, then if you can provide a small test case to start working with, I should be able to help in finding the missing details.

Best regards,
Bruno

June 6, 2015, 02:07	rotorDiskSource- Actuator Disc	#1
arjun14 New Member Arjun Join Date: May 2015 Posts: 3 Rep Power: 10	Dear FOAMers I have been trying to simulate the effect of propeller via actuator disc. I have been successful in applying the new FVoption function actuationdiscsource. However, I want to couple it with blade element theory. I believe that the FVoption function rotorDiscSource does that. I am not able to figure out how to enter the blade details such as chord and twist distribution and also the aerofoil details at each section. Is anyone aware of this function? I am fairly new to OpenFOAM and also C++, so I would appreciate if anyone could provide any suggestion. Thanks Arjun kiddmax and wurst like this.

September 20, 2015, 07:49		#2
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	Greetings Arjun, I've had this thread on my to-do list for quite some time now and only now was I able to quickly look into this. There are already a few threads on this topic, but I can't find any example to work with, therefore I can't help much further than pointing out at least the following threads: http://www.cfd-online.com/Forums/ope...read-file.html http://www.cfd-online.com/Forums/ope...isksource.html http://www.cfd-online.com/Forums/ope...l-wiggles.html If you have not yet solved this issue, then if you can provide a small test case to start working with, I should be able to help in finding the missing details. Best regards, Bruno kiddmax likes this. __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fvOptions (RotorDiskSource). How read from File?	be_inspired	OpenFOAM Running, Solving & CFD	14	May 15, 2017 10:19
[snappyHexMesh] Mesh of a horizontal axis WT for using rotorDiskSource?	be_inspired	OpenFOAM Meshing & Mesh Conversion	2	July 25, 2016 07:24
Preparing A Mesh For rotorDiskSource	lordvon	OpenFOAM Running, Solving & CFD	0	August 21, 2014 23:14
New rotorDiskSource function	dehein2	OpenFOAM Running, Solving & CFD	3	May 7, 2013 09:40