|
[Sponsors] |
Solid displacement due to calculated velocity/pressure distribution |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 5, 2016, 04:20 |
Solid displacement due to calculated velocity/pressure distribution
|
#1 |
New Member
Amelie Rohlfs
Join Date: Jan 2013
Posts: 19
Rep Power: 13 |
Hello,
my intitial goal was to perform fsi for turbomachinery to check runner blade displacement. Due to an unexpected (as always) lack of time I am forced to simplify my problem a bit. What I want to do now: Apply a simulated (with MRFSimpleFoam) flow distribution as load for a stress model. I am not very familiar with the OpenFoam stress solvers, so maybe somebody could give me a hint to some useful tutorial. My geometry can be seen in the attached picture. The runner blade is the only solid part. I am grateful for any advice! Cheers, Amelie |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
dsmcFoam setup | hherbol | OpenFOAM Pre-Processing | 1 | November 19, 2021 01:52 |
[swak4Foam] funkyDoCalc with OF2.3 massflow | NiFl | OpenFOAM Community Contributions | 14 | November 25, 2020 03:30 |
Immersed solid, vs solid-fluid interaction to determine forces on a submerged solid | amrbekhit | CFX | 0 | January 8, 2015 16:39 |
dynamicMesh - move surface due to velocity/pressure | Tobi | OpenFOAM Running, Solving & CFD | 5 | November 1, 2014 14:18 |
Spanwise load distribution due to change in twist! | mimi | Main CFD Forum | 1 | June 6, 2007 10:57 |