|
[Sponsors] |
September 21, 2018, 06:17 |
Not Solving for Uy
|
#1 |
New Member
Vignesh
Join Date: Jul 2018
Location: India
Posts: 6
Rep Power: 7 |
Hi,
I am using SimpleFoam solver for simulating the hydrodynamics of a stirred tank. when i run the simulation it solves for Ux,Uz and not for Uy..!!! The log is as follows: //================================================== = smoothSolver: Solving for Ux, Initial residual = 1.23763e-06, Final residual = 3.59452e-08, No Iterations 2 smoothSolver: Solving for Uz, Initial residual = 1.85972e-06, Final residual = 5.40557e-08, No Iterations 2 GAMG: Solving for p, Initial residual = 7.41084e-06, Final residual = 3.21887e-07, No Iterations 3 GAMG: Solving for p, Initial residual = 4.16623e-07, Final residual = 1.45348e-08, No Iterations 4 time step continuity errors : sum local = 1.06738e-07, global = 4.21417e-18, cumulative = -7.87406e-16 smoothSolver: Solving for epsilon, Initial residual = 3.45932e-06, Final residual = 9.5442e-08, No Iterations 2 smoothSolver: Solving for k, Initial residual = 4.62608e-06, Final residual = 1.32595e-07, No Iterations 2 ExecutionTime = 116599 s ClockTime = 116606 s //================================================== ======= There seems to be no problem in geometry or meshing, i ran the checkmesh utility which confirmed the same Kindly help in resolving this issue, as wells as in stating the reason. Thanks in advance..!! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Segmentation fault when using reactingFOAM for Fluids | Tommy Floessner | OpenFOAM Running, Solving & CFD | 4 | April 22, 2018 12:30 |
chtMultiRegionSimpleFoam turbulent case | Aditya Patil | OpenFOAM Running, Solving & CFD | 6 | April 24, 2017 22:13 |
Unstabil Simulation with chtMultiRegionFoam | mbay101 | OpenFOAM Running, Solving & CFD | 13 | December 28, 2013 13:12 |
calculation stops after few time steps | sivakumar | OpenFOAM Running, Solving & CFD | 7 | March 17, 2013 06:37 |
Could anybody help me see this error and give help | liugx212 | OpenFOAM Running, Solving & CFD | 3 | January 4, 2006 18:07 |