|
[Sponsors] |
![]() |
![]() |
#1 |
Senior Member
Join Date: Mar 2010
Location: Auckland, NZ
Posts: 168
Rep Power: 16 ![]() |
Hi everyone,
I was wondering whether anyone knew whether there was an implementation of the mixing plane approach to rotor-stator interactions which had been implemented for OF. I've been out of the OF loop for a little while and wondered there might have been some work on supporting these kinds of (turbomachinery) based problems in the meantime. I think there was some work by some members for hydro turbine applications, but this was done on a fork (foam-extend) of the original project. if so, would anyone have a view as to how difficult / whether it would be tractable to port this code over (if it was finished) - thinking of other libraries / changes which might have been done in the extend-project which were not in the "original" OF repo's. thanks a lot in advance for any input, regards jonathan PS If this functionality is not available, is anyone currently using OF 7 project to do turbomachinery work and if so, how have you solved this problem for this (steady-state) approach . Thanks again in advance |
|
![]() |
![]() |
![]() |
![]() |
#2 |
New Member
Join Date: Mar 2017
Posts: 25
Rep Power: 8 ![]() |
Hi Jonathan,
Why don't you simply use foam-extend, which works quite well for turbomachinery applications? I can imagine that a porting is not that easy. As you have already noted the code base of both versions is quite different by now, including dependencies to other extensions made in foam extend. regards .bastian Last edited by .bastian; March 4, 2020 at 10:12. |
|
![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Mar 2010
Location: Auckland, NZ
Posts: 168
Rep Power: 16 ![]() |
Thanks Bastion,
That seems like the most pertinent thing to do. I'll download it an have a play. Much appreciated Regards Jonathan |
|
![]() |
![]() |
![]() |
Tags |
cfd, frozen rotor, mixing plane, open foam, turbomachinery |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
OpenFOAM error | Vinay Kumar V | Main CFD Forum | 0 | February 20, 2020 09:17 |
[Gmsh] Problem with Gmsh | nishant_hull | OpenFOAM Meshing & Mesh Conversion | 23 | August 5, 2015 02:09 |
What's mixing plane? | zjvskobe | Main CFD Forum | 1 | December 8, 2014 20:54 |
mixing plane & mesh interfaces | amin.z | FLUENT | 0 | June 24, 2014 01:28 |
New OpenFOAM Forum Structure | jola | OpenFOAM | 2 | October 19, 2011 06:55 |