pUCoupledFoam time consumption

Hgholami · December 7, 2020, 12:32

Dear foamer
the pUCoupledFoam use block matrix to solve p and u in fluid simulation. As the publication shows, the iteration is lower that segregated solver. But in cpu time, the time estimated is some time more than piso solvers. do you have same issue?

dlahaye · December 8, 2020, 02:53

I have not run the test myself.

I do imagine however that the linear solvers that OpenFoam provides by default are not the most suitable ones. Work on providing better solvers is work in progress.

OpenFoam now provides an interface to the external solver library PETSc [1]. This provides room to develop more advanced linear solvers for the coupled systems. Usual suspects include algebraic multigrid with Vanka smoothers and Schur complement preconditioners. The development of these more advanced solvers will require substantial work.

[1]: OpenFoam-PETSc interface: https://develop.openfoam.com/modules/external-solver

December 7, 2020, 12:32	pUCoupledFoam time consumption	#1
Hgholami Senior Member Hojatollah Gholami Join Date: Jan 2019 Posts: 171 Rep Power: 7	Dear foamer the pUCoupledFoam use block matrix to solve p and u in fluid simulation. As the publication shows, the iteration is lower that segregated solver. But in cpu time, the time estimated is some time more than piso solvers. do you have same issue?

December 8, 2020, 02:53		#2
dlahaye Senior Member Domenico Lahaye Join Date: Dec 2013 Posts: 724 Blog Entries: 1 Rep Power: 17	I have not run the test myself. I do imagine however that the linear solvers that OpenFoam provides by default are not the most suitable ones. Work on providing better solvers is work in progress. OpenFoam now provides an interface to the external solver library PETSc [1]. This provides room to develop more advanced linear solvers for the coupled systems. Usual suspects include algebraic multigrid with Vanka smoothers and Schur complement preconditioners. The development of these more advanced solvers will require substantial work. [1]: OpenFoam-PETSc interface: https://develop.openfoam.com/modules/external-solver cryabroad and Hgholami like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
courant number increases to rather large values	6863523	OpenFOAM Running, Solving & CFD	22	July 5, 2023 23:48
simpleFoam error - "Floating point exception"	mbcx4jc2	OpenFOAM Running, Solving & CFD	12	August 4, 2015 02:20
Micro Scale Pore, icoFoam	gooya_kabir	OpenFOAM Running, Solving & CFD	2	November 2, 2013 13:58
same geometry,structured and unstructured mesh,different behaviour.	sharonyue	OpenFOAM Running, Solving & CFD	13	January 2, 2013 22:40
plot over time	fferroni	OpenFOAM Post-Processing	7	June 8, 2012 07:56