New densitybased solver AeroFoam

abhi · August 28, 2009, 08:10

Thats a gre8 news. I was waiting this to happen.
Thanks a lot Giulio.
Is turbulence also available in this version ?

jackpap · November 3, 2009, 17:18

Is this AeroFoam for v1.5 available yet ? If so where can I find it ?

KrisT · November 16, 2009, 06:22

There is this code rhoCentralFoam, how does it differ from the newer AeroFoam?

mecbe2002 · May 26, 2010, 11:09

Hi all,

Is AeroFoam available for OpenFoam 1.6. If so where can i download the source code.

thanks
mecbe

GD07 · July 3, 2010, 06:47

hello everybody,

i just wanted to know if AeroFoam is available for OF 1.6 .
thank you

mecbe2002 · July 3, 2010, 07:05

Unfortunately No.

Thanks
mecbe

Marta · October 14, 2010, 08:47

Hi all, i would like to use the 3D toolbox to make a movie of the AGARD wing of the tutorial. I have it activated, but i do not know how to use it.

Can someone tell me please?

Thanks a lot!

Marta

Marta · October 14, 2010, 08:53

Dear all, i am trying to run the AGARD wing tutorial, but I do not know how to make the movie i saw on the website.
I have already activated the 3D toolbox and data are saved correctly, so everything is fine with the run.

Thanks a lot,

Marta

eeshwar · October 20, 2010, 02:59

Hi Guilo,

I am trying to add a new monoflux scheme (KFVS) similar to that of AUSM, Roe fluxes, etc.,. I have made correction to include the file in header for Aerofoam.C (#include KFVSFlux.C) file and called successfully from build_fluxes.C, I got no compilation errors when I ran wmake in the AeroFoam folder through Terminal.

But when I use the scheme to run a test case it gives the following error.

Does everything look fine? [y] to continue [n] otherwise y

Starting time loop...

#0 Foam::error:: printStack(Foam::Ostream&) in "/home/xx/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libOpenFOAM.so"
#1 Foam::sigFpe::sigFpeHandler(int) in "/home/xx/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libOpenFOAM.so"
#2 Uninterpreted: [0x997400]
#3 kfvs_flux(double, double, double, Foam::Vector<double>, Foam::Vector<double>, double, double, Foam::Vector<double>, double*, Foam::Vector<double>*, double*, double) in "/home/madhu/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linuxGccDPOpt/AeroFoam"
#4 build_fluxes(Foam::Field<double>*, Foam::word, Foam::dimensioned<double>*, Foam::dimensioned<double>*, Foam::dimensioned<double>*, Foam::fvMesh*, Foam::Field<int>*, Foam::Field<int>*, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>*, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>*, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>*, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>*, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>*, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>*, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>*, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>*, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>*, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>*, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh>* at Foam::GeometricField<Foam::Vector<double>, Foam::fvsPatchField, Foam::surfaceMesh>*, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh>*, Foam::word, Foam::word, Foam::word, Foam::word, double)
#5 main in "/home/xx/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linuxGccDPOpt/AeroFoam"
#6 __libc_start_main in "/lib/tls/i686/cmov/libc.so.6"
#7 _start at /build/buildd/eglibc-2.10.1/csu/../sysdeps/i386/elf/start.S:122
Floating point exception

Do I need to make changes in other places to incorporate the file.

Thanks in advance,
Eeshwar.

rock.senthilkumar · December 25, 2010, 09:42

Dear all,
Any body have updated AeroFoam solver which works on Open Foam 1.6 or higher version? Please reply...

Solarberiden · June 17, 2011, 03:48

Quote:

Originally Posted by abhi

Thats a gre8 news. I was waiting this to happen.
Thanks a lot Giulio.
Is turbulence also available in this version ?

Finally, till now it didn't happen, the parallel version

aerothermal · December 5, 2011, 11:20

See that someone developed a 1.7.1 version.

I have not tested yet.

https://sourceforge.net/projects/aerofoam/

arashfluid · October 8, 2013, 02:37

Hi
Does anyone have a benchmark for AeroFoam Solver in OpenFOAM-1.7.x or 1.6-ext or newer versions?

October 20, 2010, 02:59	Problem regarding adding another monoflux scheme in Aerofoam	#9
eeshwar New Member Sathishwar Reddy SPD. Join Date: Oct 2010 Posts: 1 Rep Power: 0	Hi Guilo, I am trying to add a new monoflux scheme (KFVS) similar to that of AUSM, Roe fluxes, etc.,. I have made correction to include the file in header for Aerofoam.C (#include KFVSFlux.C) file and called successfully from build_fluxes.C, I got no compilation errors when I ran wmake in the AeroFoam folder through Terminal. But when I use the scheme to run a test case it gives the following error. Does everything look fine? [y] to continue [n] otherwise y Starting time loop... #0 Foam::error:: printStack(Foam::Ostream&) in "/home/xx/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libOpenFOAM.so" #1 Foam::sigFpe::sigFpeHandler(int) in "/home/xx/OpenFOAM/OpenFOAM-1.4.1/lib/linuxGccDPOpt/libOpenFOAM.so" #2 Uninterpreted: [0x997400] #3 kfvs_flux(double, double, double, Foam::Vector<double>, Foam::Vector<double>, double, double, Foam::Vector<double>, double, Foam::Vector<double>, double, double) in "/home/madhu/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linuxGccDPOpt/AeroFoam" #4 build_fluxes(Foam::Field<double>, Foam::word, Foam::dimensioned<double>, Foam::dimensioned<double>, Foam::dimensioned<double>, Foam::fvMesh, Foam::Field<int>, Foam::Field<int>, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>, Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh>, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>, Foam::GeometricField<Foam::Vector<double>, Foam::fvPatchField, Foam::volMesh>, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh>* at Foam::GeometricField<Foam::Vector<double>, Foam::fvsPatchField, Foam::surfaceMesh>, Foam::GeometricField<double, Foam::fvsPatchField, Foam::surfaceMesh>, Foam::word, Foam::word, Foam::word, Foam::word, double) #5 main in "/home/xx/OpenFOAM/OpenFOAM-1.4.1/applications/bin/linuxGccDPOpt/AeroFoam" #6 __libc_start_main in "/lib/tls/i686/cmov/libc.so.6" #7 _start at /build/buildd/eglibc-2.10.1/csu/../sysdeps/i386/elf/start.S:122 Floating point exception Do I need to make changes in other places to incorporate the file. Thanks in advance, Eeshwar. Last edited by eeshwar; October 20, 2010 at 04:44.

December 25, 2010, 09:42	AeroFoam	#10
rock.senthilkumar New Member senthilkumar.R Join Date: Sep 2010 Location: Ranchi, India Posts: 20 Rep Power: 15	Dear all, Any body have updated AeroFoam solver which works on Open Foam 1.6 or higher version? Please reply... __________________ Senthil Kumar. R Department of space Engineering and Rocketry, Birla Institute of Technology,Mesra. rock.senthilkumar@gmail.com

December 5, 2011, 11:20	sourceForge AoeroFoam for OF1.7	#12
aerothermal Senior Member Guilherme da Silva Join Date: Aug 2010 Location: Sao Paulo - Brazil Posts: 118 Rep Power: 15	See that someone developed a 1.7.1 version. I have not tested yet. https://sourceforge.net/projects/aerofoam/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
segregated solver vrs coupled solver	sm	FLUENT	0	November 6, 2007 01:24
Densitybased coupled compressible solver	jojo	OpenFOAM Running, Solving & CFD	0	July 19, 2006 12:43
How to do it if i change the seregated finitevolume solver to segregated finiteelement solver	dandes	OpenFOAM Pre-Processing	0	March 22, 2006 21:06
AGM-SOLVER	MANOJ	FLUENT	5	August 1, 2005 04:49
coupled solver / uncoupled solver	Jaan Unger	Main CFD Forum	0	September 3, 2002 08:30

August 28, 2009, 08:10		#1
abhi New Member Abhishek Join Date: Mar 2009 Location: Pune, India Posts: 2 Rep Power: 0	Thats a gre8 news. I was waiting this to happen. Thanks a lot Giulio. Is turbulence also available in this version ?

November 3, 2009, 17:18		#2
jackpap New Member Jacques Join Date: Oct 2009 Posts: 15 Rep Power: 16	Is this AeroFoam for v1.5 available yet ? If so where can I find it ?

November 16, 2009, 06:22	rhoCentralFoam	#3
KrisT Member Join Date: May 2009 Posts: 32 Rep Power: 17	There is this code rhoCentralFoam, how does it differ from the newer AeroFoam?

May 26, 2010, 11:09	AeroFoam for OpenFoam 1.6	#4
mecbe2002 Senior Member KGN Join Date: Oct 2009 Location: Chennai, India Posts: 121 Rep Power: 16	Hi all, Is AeroFoam available for OpenFoam 1.6. If so where can i download the source code. thanks mecbe

July 3, 2010, 06:47	Aerofoam for OpenFoam 1.6	#5
GD07 New Member Gabriel D Join Date: May 2010 Posts: 5 Rep Power: 15	hello everybody, i just wanted to know if AeroFoam is available for OF 1.6 . thank you

July 3, 2010, 07:05		#6
mecbe2002 Senior Member KGN Join Date: Oct 2009 Location: Chennai, India Posts: 121 Rep Power: 16	Unfortunately No. Thanks mecbe

October 14, 2010, 08:47		#7
Marta Member Marta Lazzarin Join Date: Jun 2009 Location: Italy Posts: 71 Rep Power: 16	Hi all, i would like to use the 3D toolbox to make a movie of the AGARD wing of the tutorial. I have it activated, but i do not know how to use it. Can someone tell me please? Thanks a lot! Marta

October 14, 2010, 08:53		#8
Marta Member Marta Lazzarin Join Date: Jun 2009 Location: Italy Posts: 71 Rep Power: 16	Dear all, i am trying to run the AGARD wing tutorial, but I do not know how to make the movie i saw on the website. I have already activated the 3D toolbox and data are saved correctly, so everything is fine with the run. Thanks a lot, Marta

October 8, 2013, 02:37		#13
arashfluid Member Arash Mahboubidoust Join Date: Jun 2013 Location: Iran Posts: 58 Rep Power: 12	Hi Does anyone have a benchmark for AeroFoam Solver in OpenFOAM-1.7.x or 1.6-ext or newer versions?