transient Simulation with porous media

Chrisi1984 · September 6, 2010, 04:45

Hi,

is there a transient solver which can model porous medias in OpenFOAM ?

Also there is a file "porousZones" in folder constant of the tutorial for the solver rhoPimpleFoam (OF 1.6), for me it seems as if the solver would not include the darcy law, right?

Can some one give me advise how to implement the darcy law like it is done in rhoPorousSimpleFoam (implicit).

Are anywhere still existing some transient solvers for porous media?

Best ragards Chrisi

Chrisi1984 · September 6, 2010, 07:08

Hi,

I solved my problem.

I discovered that in OF 1.7 there is a transient solver for porous medias named rhoPorousMRFPimpleFoam.

Perhabs it helps someone.

Regards Chrisi

Black-Pearl · June 20, 2011, 09:31

Hello, are you coming along well with the Solver?
I have many Problems.

zqq · December 2, 2012, 20:40

I always search for a transient solver of porosity,it helps me,thanks

adrianabm · August 26, 2015, 09:34

hello,

i'm new to OpenFOAM and am currently using version 2.4, do you know if there would be an equivalent solver to the one you mentioned in the new version ? (I can't seem to find rhoPorousMRFPimpleFoam)

thanks

student666 · August 26, 2015, 15:13

Hi adriana,

you can use pimpleFoam, simpleFoam, or whatever and by adding fvOptions dict into system directory you can add a porous zone.

Google fvOptions.

Bye

adrianabm · August 26, 2015, 16:13

hello,

I am currently using porousSimpleFoam and adding a porous zone by using the commands
setSet -> cellSet -> cellZoneSet (and i haven't found a way yet to verify if indeed the porous zone is implemented correctly or not) but I was curious because I am looking for a way to solve the flow through a porous medium by using a transient solver instead of the steady state one...
and I'm not sure that if I simply set "Euler" or another method in the ddt scheme "key" in fvScheme, it would switch from steady state to transient (?)... I'm pretty sure it's not that simple..

So from your comment I understand that I can use any solver as long as I combine it with the correct definition of a porous zone in fvOptions, it should work ?

anyway, thanks for your message, i'll look into it tomorrow

September 6, 2010, 04:45	transient Simulation with porous media	#1
Chrisi1984 Senior Member Join Date: Jan 2010 Location: Stuttgart Posts: 150 Rep Power: 16	Hi, is there a transient solver which can model porous medias in OpenFOAM ? Also there is a file "porousZones" in folder constant of the tutorial for the solver rhoPimpleFoam (OF 1.6), for me it seems as if the solver would not include the darcy law, right? Can some one give me advise how to implement the darcy law like it is done in rhoPorousSimpleFoam (implicit). Are anywhere still existing some transient solvers for porous media? Best ragards Chrisi

September 6, 2010, 07:08		#2
Chrisi1984 Senior Member Join Date: Jan 2010 Location: Stuttgart Posts: 150 Rep Power: 16	Hi, I solved my problem. I discovered that in OF 1.7 there is a transient solver for porous medias named rhoPorousMRFPimpleFoam. Perhabs it helps someone. Regards Chrisi Bahram likes this.

December 2, 2012, 20:40	thanks	#4
zqq New Member zqq Join Date: Jun 2012 Posts: 1 Rep Power: 0	I always search for a transient solver of porosity,it helps me,thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
flow thru porous media, PLEASE HELP	Goker	FLUENT	4	September 8, 2012 04:02
DPM on porous media	magnounibo	FLUENT	0	April 23, 2009 06:35
Testing the integrity of POROUS media and por jump	Azman	FLUENT	0	July 31, 2006 11:11
Three-Phase Simulation Through Porous Media	Sanjib	FLUENT	0	July 17, 2005 12:49
Porous media and convergence	A.Joshi	FLUENT	0	October 21, 2003 22:09

June 20, 2011, 09:31		#3
Black-Pearl New Member Cecily Join Date: Jun 2011 Location: Germany Posts: 10 Rep Power: 14	Hello, are you coming along well with the Solver? I have many Problems.

August 26, 2015, 09:34		#5
adrianabm New Member a.b.mkarzel Join Date: Jul 2015 Location: Switzerland Posts: 8 Rep Power: 10	hello, i'm new to OpenFOAM and am currently using version 2.4, do you know if there would be an equivalent solver to the one you mentioned in the new version ? (I can't seem to find rhoPorousMRFPimpleFoam) thanks

August 26, 2015, 15:13		#6
student666 Senior Member M. C. Join Date: May 2013 Location: Italy Posts: 286 Blog Entries: 6 Rep Power: 16	Hi adriana, you can use pimpleFoam, simpleFoam, or whatever and by adding fvOptions dict into system directory you can add a porous zone. Google fvOptions. Bye

August 26, 2015, 16:13		#7
adrianabm New Member a.b.mkarzel Join Date: Jul 2015 Location: Switzerland Posts: 8 Rep Power: 10	hello, I am currently using porousSimpleFoam and adding a porous zone by using the commands setSet -> cellSet -> cellZoneSet (and i haven't found a way yet to verify if indeed the porous zone is implemented correctly or not) but I was curious because I am looking for a way to solve the flow through a porous medium by using a transient solver instead of the steady state one... and I'm not sure that if I simply set "Euler" or another method in the ddt scheme "key" in fvScheme, it would switch from steady state to transient (?)... I'm pretty sure it's not that simple.. So from your comment I understand that I can use any solver as long as I combine it with the correct definition of a porous zone in fvOptions, it should work ? anyway, thanks for your message, i'll look into it tomorrow