OpenFOAM Running, Solving & CFD

Rating Thread / Thread Starter	Last Post	Replies	Views
Instability introduced by using mutRoughWallFunctions? AlexC	March 18, 2014 14:14 by AlexC	1	1,228
Understanding inner loops chriss85	March 18, 2014 03:53 by chriss85	1	1,236
Starting pimpleFoam computation from simpleFoam result vinz	March 17, 2014 12:35 by vut	9	2,125
pisoFoam fails with locDynOneEqEddy gfilip	March 17, 2014 11:32 by vut	2	1,586
Case can't run continuously in OpenFOAM? wzx1989221	March 17, 2014 08:01 by wzx1989221	2	1,017
Turbulent cyclic pipe flow, wall functions and y+ clyde	March 17, 2014 06:08 by wzx1989221	3	3,585
DPMFoam case worked perfectly in the first run but crashes in every subsequent run!! ansubru	March 17, 2014 04:27 by ansubru	6	3,173
Segmentation fault (core dumped) in Axial_Rotor_MRF sam.ho	March 17, 2014 01:42 by sam.ho	0	1,471
Heat transfer by conduction and OpenFOAM rogbrito	March 16, 2014 18:32 by rogbrito	0	909
Trying to figure out the details of simpleFoam brooksmoses	March 16, 2014 15:19 by alundilong	9	12,400
Flow around a sphere using chtMultiRegionFoam Niccolo	March 16, 2014 14:20 by Niccolo	0	1,530
Combining two three solvers sachin	March 16, 2014 03:27 by sachin	0	1,079
Viewing 2D slice of a 3D model yodakohl	March 15, 2014 13:12 by yodakohl	4	1,472
Cooling tower: several aspects letzel	March 15, 2014 03:07 by wyldckat	6	2,287
Heat conduction problems in OF220 Nico A.	March 14, 2014 09:21 by vitors	6	1,722
dpdt-term in energy equation of buoyantPimpleFoam JensP	March 14, 2014 07:15 by JensP	4	4,353
Access a probed value anlj	March 14, 2014 06:40 by gschaider	12	2,414
Isothermal twoPhaseEulerFoam Kaskade	March 14, 2014 01:53 by Kaskade	0	1,121
turbineSiting tutorial ali.m.1	March 13, 2014 17:16 by ali.m.1	0	1,132
Channel Flow pisoFoam SA IDDES Re=4560 ingcorra	March 13, 2014 09:58 by vut	10	1,920
FOAM FATAL ERROR in Foam ... could not find mandatory file 'controlDict leonidassr	March 13, 2014 09:20 by leonidassr	0	2,056
2D isothermal cylinder not converging UPengineer	March 13, 2014 05:17 by jherb	7	3,130
Simulate two phase (vapor and tiny droplets) flow Gitesh P	March 13, 2014 03:35 by Gitesh P	0	861
spray condensation solver Smed	March 13, 2014 02:10 by wolfindark	1	1,228
Does .H() change matrix coefficients? meindert	March 12, 2014 16:23 by meindert	0	823
MapField warning for 3D mesh kiddmax	March 12, 2014 11:07 by kiddmax	5	1,364
buoyantSimpleFoam, problem with additional heat flux karoltomek	March 12, 2014 09:01 by karoltomek	1	1,056
dQ monitor Roman1	March 12, 2014 02:21 by Roman1	0	897
OpenFOAM parallel running error in cluster vishal_s	March 11, 2014 15:11 by wyldckat	5	4,527
How to set outflow boundary condition in openfoam gejiabin	March 11, 2014 07:16 by Ruli	4	7,701
Accurately calculate boundaryField average ripudaman	March 10, 2014 20:35 by ripudaman	2	1,100
Errors running interDyMFoam Prosper	March 10, 2014 09:31 by nimasam	3	933
should Courant number always be kept below 1? wc34071209	March 9, 2014 19:31 by huangxianbei	16	5,467
chtmultiregion startFace yossi	March 9, 2014 15:47 by yossi	4	4,215
devolatilization Chrisi1984	March 9, 2014 11:02 by Chrisi1984	2	1,170
find best solver ? jvd.mechanic	March 9, 2014 10:40 by Lieven	1	850
Eddy viscosity ratio in interDyMFoam? wavemaster	March 9, 2014 03:57 by agar_shod	1	1,154
channel395 compress files christianfrias	March 9, 2014 00:09 by huangxianbei	1	1,099
floating point exception oldirtybrindley	March 8, 2014 16:56 by Lieven	2	2,692
Beginner question: How to simulate a fan in a pipe? Hansemann	March 8, 2014 02:58 by Hansemann	0	934

Read this first: How to ask a question on the forums

Page 314 of 481

314

	New posts		Hot thread with new posts
	No new posts		Hot thread with no new posts
	Thread is closed

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

All times are GMT -4. The time now is 02:10.