|
[Sponsors] |
January 24, 2019, 17:21 |
Calculating y+ values in the inner cells
|
#1 |
New Member
Adithya Gurumurthy
Join Date: Jun 2017
Posts: 18
Rep Power: 8 |
Hello Foamers!
I have incorporated y+ calculations in my code (following a similar procedure as in http://www.tfd.chalmers.se/~hani/kur..._Xu_Report.pdf ). However, this calculates y+ only in cells near the boundary of a wall patch. I would like to calculate y+ values in cells that are, say 4-5 layers from the wall patch. Could someone help me out with this? Thanks |
|
January 25, 2019, 04:12 |
|
#2 |
New Member
Xavier Lamboley
Join Date: Jan 2015
Location: Bordeaux, France
Posts: 13
Rep Power: 11 |
Hi raptorishungry,
I have myself implemented functionObjects which calculate uStar on the wall patch, and uPlus and yPlus in the whole field on this thread. However, uPlus and yPlus use the average uStar on the wall, and should be using the value on nearest patch face. If you have any idea on this topic this would be welcome |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] SnappyHexMesh running killed! | Mark JIN | OpenFOAM Meshing & Mesh Conversion | 7 | June 14, 2022 01:37 |
Questions on dynamicTopoFvMesh | danvica | OpenFOAM Running, Solving & CFD | 80 | April 16, 2019 16:58 |
Problem with divergence | TDK | FLUENT | 13 | December 14, 2018 06:00 |
snappyHexMesh in parallel - FOAM Fatal IO Error | mturcios777 | OpenFOAM Running, Solving & CFD | 4 | August 10, 2012 19:18 |
assign values to selected cells | zxj160 | OpenFOAM Pre-Processing | 4 | June 29, 2012 12:17 |