|
[Sponsors] |
Loosing geometry after running snappyhexmesh for the ship |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 22, 2022, 04:47 |
Loosing geometry after running snappyhexmesh for the ship
|
#1 |
New Member
MS
Join Date: Aug 2022
Posts: 9
Rep Power: 3 |
I am working with the DTMB geometry with a length of 5.72m (Lpp). When I execute snappyhexmesh I am loosing geometry as can be seen from attached figure. When I performed interfoam there is water inside the ship. I am attaching how my geometry look after executing snappyhexmesh (surface refinement level (0,0)).
I am also attaching another geometry of length of 2.5 m (Lpp). On this ship when snappy with a surface refinement of level (5,6) was performed, no loose of geometry was observed. The ship I mentioned in the first was taken from http://www.simman2008.dk/5415/5415_geometry.htm , the size of stl file is 1 Mb, but the ship I mentioned second (L=2.5m) has a size of 20 Mb. How I can rectify this issue. Is that because of lacking cad geometry repair, if so what repair work I should do for my ship. Any suggestion is welcomed and highly appreciated Waiting for a fast reply from someone Thanks and regards |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] SnappyHexMesh won't snap to geometry (external flow) | JTDN | OpenFOAM Meshing & Mesh Conversion | 4 | July 1, 2019 07:17 |
[snappyHexMesh] SnappyHexMesh meshes inside and outside of an STL geometry | villier | OpenFOAM Meshing & Mesh Conversion | 17 | June 15, 2010 19:51 |
[snappyHexMesh] snappyHexMesh geometry | Kristianur | OpenFOAM Meshing & Mesh Conversion | 16 | April 4, 2010 10:14 |
Statically Compiling OpenFOAM Issues | herzfeldd | OpenFOAM Installation | 21 | January 6, 2009 09:38 |
vitual _ real | deneb | FLUENT | 3 | January 22, 2007 04:31 |