Problem with cyclic bc when run on parallel

Tek · January 18, 2010, 00:06

Hi everyone!
I'm a novice with openfoam.I try to run two channelFoam case (one for mesh constructed from block mesh,other for mesh converted from fluentMeshtoFoam) with cyclic BC.When i run parallel with the first one with many kind of decomposePar there is no problem.But it happen when i run parallel with the second one.It print to the screen " create Mesh for time = 0" and stop ,i wait for long time but nothing happen.
I hope somebody whose experience with this problem can help me.
Thanks to reading and sorry about my English.

Tek · January 18, 2010, 04:57

does everyone has an idear ?What's problem with cyclic bc when decomposePar? I guest it's relevant with reading Mesh but i still don't understand...
everyhelp is appriciate!!

cheng1988sjtu · January 20, 2011, 14:40

Hi Tek,

I've just started to run the channelFoam, and run parallel, it seems OK, even though I have cycle BC in the domain, so maybe it's due to the conversion from Fluent to OpenFoam.

Perhaps, some boundary type has changed? you may check it,

Good luck~

Zhen

January 18, 2010, 00:06	Problem with cyclic bc when run on parallel	#1
Tek New Member New guy Join Date: Jan 2010 Posts: 4 Rep Power: 16	Hi everyone! I'm a novice with openfoam.I try to run two channelFoam case (one for mesh constructed from block mesh,other for mesh converted from fluentMeshtoFoam) with cyclic BC.When i run parallel with the first one with many kind of decomposePar there is no problem.But it happen when i run parallel with the second one.It print to the screen " create Mesh for time = 0" and stop ,i wait for long time but nothing happen. I hope somebody whose experience with this problem can help me. Thanks to reading and sorry about my English.

January 20, 2011, 14:40	I don't think it's due to cycle bc	#3
cheng1988sjtu Member Charlie Join Date: Dec 2010 Location: USA Posts: 85 Rep Power: 15	Hi Tek, I've just started to run the channelFoam, and run parallel, it seems OK, even though I have cycle BC in the domain, so maybe it's due to the conversion from Fluent to OpenFoam. Perhaps, some boundary type has changed? you may check it, Good luck~ Zhen

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Script to Run Parallel Jobs in Rocks Cluster	asaha	OpenFOAM Running, Solving & CFD	12	July 4, 2012 22:51
Cannot run Star-CCM+ parallel in Linux	dburns	Siemens	9	April 27, 2010 12:01
problem specifying alpha at inlet during a parallel run	phsieh2005	OpenFOAM Running, Solving & CFD	2	August 13, 2009 08:23
Problem on Parallel Run Setup	Hamidur Rahman	CFX	0	September 23, 2007 17:11
Serial run OK parallel one fails	r2d2	OpenFOAM Running, Solving & CFD	2	November 16, 2005 12:44

January 18, 2010, 04:57		#2
Tek New Member New guy Join Date: Jan 2010 Posts: 4 Rep Power: 16	does everyone has an idear ?What's problem with cyclic bc when decomposePar? I guest it's relevant with reading Mesh but i still don't understand... everyhelp is appriciate!!