CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > Phoenics

How to improve the calculation result for the f

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   November 18, 2000, 09:41
Default How to improve the calculation result for the f
Posts: n/a
I have a case which presents a hollow cylinder nozzle with two sloping tapping port submerged in the mold. Inlet condition (from the hollow nozzle) is regarded as fixed mass flux. Outlet condition (from the bottom of the mold) is considered as fixed pressure. Because of complex geometry of the nozzle,Fine Grid and PARSOL are used. All condition is simple and I check it many times.But the solution of Flow Field isn't obviously correct. How can I improve the calculation result for the fluid flowing in complex geometry nozzle by other means?

Thank for your kind reply!
  Reply With Quote

Old   December 8, 2000, 11:28
Default Re: How to improve the calculation result for the
John Ludwig
Posts: n/a
If you are a supportd user, send your Q1 (and any geometry files needed) to They will see what is happening.
  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Improve grid Gernot FLUENT 1 August 5, 2005 09:36
How can CFD be used to improve race car? A Chu FLUENT 1 February 8, 2004 20:21
How to improve the accuracy of the CFX? Miko CFX 4 June 12, 2003 21:24
to improve convergence Mohamed FLUENT 0 May 14, 2003 05:43
How to improve y-velocity ravi FLUENT 2 March 28, 2003 08:01

All times are GMT -4. The time now is 15:16.