CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Phoenics

crash - help message

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 30, 2002, 08:18
Default crash - help message
  #1
short
Guest
 
Posts: n/a
If PHOENICS crashes I get a black screen flash over the monitor disaply which subsequently disapears very quickly. I assume this message might point to the source of the problem. If so how can I get a longer look at the rapidly disappearing black screen.

Any suggestions?
  Reply With Quote

Old   October 30, 2002, 14:16
Default Re: crash - help message
  #2
John Ludwig
Guest
 
Posts: n/a
Here are some extracts from the PHOENICS Installation guide, TR110, the trouble shooting section. It is also on-line at www.cham.co.uk/phoenics/d_polis/docs/tr110pc.htm. ---------------- My windows under Windows95/98/NT open and close too quickly for me to be able to see the messages.

Edit the file \phoenics\d_allpro\cham.ini ('Files', 'Open file for editing','cham.ini' from environment top menu bar) and replace the line

pause = off

by

pause = on --------------- My compile window under Windows95/98/NT opens and closes too quickly for me to be able to see the error messages.

Edit the file \phoenics\d_utils\d_windf\compile.bat, and add /list to the argument list as follows:

@echo off

df /compile_only /debug:none /optimize:3 /list %1

You will now generate listing files for each file compiled. -------------------- PHOENICS starts but immediately stops. When I click on the PHOENICS icon, the PHOENICS-VR window appears and disappears almost immediately.

Check in the working directory for the file luout. If it exists, open it with Notepad or some other file editor. It may contain an error message - usually indicating that unlocking is incorrect --------------------
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[OpenFOAM] ParaView crash srinath ParaView 2 June 1, 2008 20:03
UDF and AMG solver crash Josef FLUENT 2 August 25, 2005 09:07
Nothing Happens after this: Neither runs nor crash Arnab Siemens 2 March 21, 2005 22:12
Unusual Crash leon Phoenics 1 December 6, 2001 07:12
track cause of crash Matt Phoenics 2 October 5, 2001 10:16


All times are GMT -4. The time now is 16:37.