prob with tutorial n test.exe

November 7, 2005, 03:59

hi

Theres a small problem i have. I have to simulate 2-phase boiling..In IPSA tutorials, the 3rd tutorial concerns with such a case. But even as i do as is written in the tutorial, i dont get same results i am in dark as to what might be the reason for it? please enlighten.

I would also like to know what is meant by "energy sources for both phases"separately? physically we have only sources which give out some power...i am a bit confused.

Thirdly, while running the private version of earth, an error comes as not being able to find 'test.exe'. If anybody has that file, can he/she plz mail it to me?

Thanks for all responses in advance Arnie

November 9, 2005, 00:51

hi

It would be really nice of you if anybody cares to answer..splly from CHAM.

Arnie

January 6, 2006, 06:58

Load the Q1 :

\phoenics\d_earth\d_core\inplib\651.htm

This gives the correct result, perhaps something is wrong with your settings.

November 7, 2005, 03:59	prob with tutorial n test.exe	#1
Arnie Guest Posts: n/a	hi Theres a small problem i have. I have to simulate 2-phase boiling..In IPSA tutorials, the 3rd tutorial concerns with such a case. But even as i do as is written in the tutorial, i dont get same results i am in dark as to what might be the reason for it? please enlighten. I would also like to know what is meant by "energy sources for both phases"separately? physically we have only sources which give out some power...i am a bit confused. Thirdly, while running the private version of earth, an error comes as not being able to find 'test.exe'. If anybody has that file, can he/she plz mail it to me? Thanks for all responses in advance Arnie

November 9, 2005, 00:51	Re: prob with tutorial n test.exe	#2
Arnie Guest Posts: n/a	hi It would be really nice of you if anybody cares to answer..splly from CHAM. Arnie

January 6, 2006, 06:58	Re: prob with tutorial n test.exe	#3
mick Guest Posts: n/a	Load the Q1 : \phoenics\d_earth\d_core\inplib\651.htm This gives the correct result, perhaps something is wrong with your settings.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RhoSimpleFoam tutorial test case system dictionaries	flavio_pergolesi	OpenFOAM Running, Solving & CFD	2	April 17, 2014 09:41
1st prob: code 123 error \| 2nd prob: max. packing	Ferzola	CFX	0	November 21, 2008 13:43
test prob for 2D unsteady navier stokes equation	Shah	Main CFD Forum	5	April 20, 2007 08:25
tutorial 6 in Fluent 6.2 tutorial and Mesh	pilli4u	FLUENT	2	April 2, 2007 06:09
A conference in air load /flight simulation/flight test/wind tunnel test/aero modeling for high AOA	cimsi	Main CFD Forum	0	September 17, 1998 07:26