CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Mesh Generation & Pre-Processing Software > Pointwise & Gridgen

Block Initialization problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 18, 2022, 03:01
Default Block Initialization problem
  #1
New Member
 
hüseyin
Join Date: Jan 2022
Posts: 2
Rep Power: 0
husosan is on a distinguished road
Hi everyone
I am trying to generate volume mesh with unstructured wing store geometry. I completed the surface mesh and created the farfield domain. Also i successfully created the empty block.
I set all the boundary conditions but when ı try to initialize the block mesh i get an error message: one or more entities could not be initialized.

I am new with pointwise and dont know what to do. I try to decrease skewness equiarea and i checked the orientation of domains and nothing changed.

Does anyone have same problem before?
I am using pointwise V18.0R2

https://ibb.co/XkJqdcM
https://ibb.co/QnvzPqM
https://ibb.co/7vXLpN9
husosan is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
udf initialization problem rezaaa2 Fluent UDF and Scheme Programming 1 March 3, 2021 01:41
[ICEM] problem of bounding block philiplu ANSYS Meshing & Geometry 2 July 4, 2020 04:06
SU2-7.0.1 on ubuntu 18.04 hyunko SU2 Installation 7 March 16, 2020 05:37
[blockMesh] Mixer mesh - negative volume problem jadtwo OpenFOAM Meshing & Mesh Conversion 2 November 6, 2014 17:37
[blockMesh] Wedge-shaped block: Problem with skew faces Reni OpenFOAM Meshing & Mesh Conversion 2 October 28, 2014 13:53


All times are GMT -4. The time now is 03:18.