|
[Sponsors] |
Setting up multi-layer sediment in REEF3D model |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 29, 2024, 20:23 |
Setting up multi-layer sediment in REEF3D model
|
#1 |
New Member
zifangZhang
Join Date: Jan 2024
Posts: 9
Rep Power: 2 |
Dear seniors, recently I am conducting a locally scour study. I hope to be able to divide the sediment into multiple layers, where the median particle size of each layer can be defined separately. For example, the first layer of sediment is set to have a diameter of 0.1mm, and the second layer of sediment is set to have a particle size of 0.5mm. Can you please realize this idea? If you can achieve it, please tell me how to achieve it, thank you very much!
|
|
April 30, 2024, 01:54 |
|
#2 |
New Member
Alexander Hanke
Join Date: Dec 2023
Location: Trondheim
Posts: 25
Rep Power: 3 |
Hei.
That is currently not possible. REEF3D only supports one uniform sediment phase at the moment. |
|
May 6, 2024, 02:48 |
|
#3 |
New Member
zifangZhang
Join Date: Jan 2024
Posts: 9
Rep Power: 2 |
||
Tags |
local scour;sediment; |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
y+ = 1 boundary layer mesh with snappyHexMesh | Arzed23 | OpenFOAM Running, Solving & CFD | 6 | November 23, 2022 15:15 |
[snappyHexMesh] Error defining boundary layer around cube snappyHexMesh | crizpi21 | OpenFOAM Meshing & Mesh Conversion | 5 | October 16, 2021 10:56 |
[snappyHexMesh] Adding layer 3d wing (y+=1) | Dorian1504 | OpenFOAM Meshing & Mesh Conversion | 4 | November 10, 2017 00:56 |
[snappyHexMesh] sHM layer process keeps getting killed | MBttR | OpenFOAM Meshing & Mesh Conversion | 4 | August 15, 2016 03:21 |
[snappyHexMesh] Boundary layer generation problems | ivan_cozza | OpenFOAM Meshing & Mesh Conversion | 0 | October 6, 2010 13:47 |