CFD Online Logo CFD Online URL
Home > Forums > Siemens

Stardesign Cell Issue

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   August 2, 2005, 10:54
Default Stardesign Cell Issue
Posts: n/a
In stardesign, using polyhedral cells, does anybody know how to create a mesh with the cell size increasing with distance from a reference point? Thanks
  Reply With Quote

Old   August 4, 2005, 08:08
Default Re: Stardesign Cell Issue
Posts: n/a
Do you have geometry at the reference point, i.e. are you modelling something like a bluff body in a wind tunnel? If you have a subtracted inner volume, set the triangle size on the surfaces of the inner volume to a smaller value than the global triangle size. You can set triangle size either using a boundary face (applied to all the faces of the subtracted inner volume), or selected the inner faces individually and change the triangle size on the CAD face property page. You might need to use the right mouse button to cycle through hidden faces.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Human body into StarDesign Con Siemens 0 June 18, 2008 08:34
StarDesign preprocessing error Nick Siemens 0 May 24, 2008 22:56
Stardesign Szymon L. Siemens 6 October 8, 2007 20:50
Launch ProStar in StarDesign ? ingear Siemens 6 October 28, 2005 12:21
Mesh in stardesign to starcd! xhliu1 Siemens 2 July 6, 2005 23:06

All times are GMT -4. The time now is 17:51.