CFD Online Logo CFD Online URL
Home > Forums > Siemens

Making couples is too long!

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   September 29, 2005, 09:59
Default Making couples is too long!
Posts: n/a
Hi, Iīve got a lot of couples to make do in my mesh (arbitrary couples), and the command CPAR takes a long time to operate. How could I speed up the process?
: Playing with tolerances?
: Do it in several times?
: ...? Or maybe itīs the sign there will be errors...?(but I donīt think so)

Thank you V
  Reply With Quote

Old   October 2, 2005, 04:51
Default Re: Making couples is too long!
Anton Lyaskin
Posts: n/a
Try to select only those cell, which will really participate in the matching process. CPAR looks for the couples in the current cell set.
  Reply With Quote

Old   October 2, 2005, 23:03
Default Re: Making couples is too long!
Posts: n/a
first go for crack check. then cell plot. it will show only those cells where u need to do couple. then from couple tool do it or from cpmatch cset.
  Reply With Quote

Old   October 5, 2005, 16:44
Default Re: Making couples is too long!
Posts: n/a
Smalling up the cset is good advice. Also try using the 'Choose Attached Shell Types'. I've found that this helps create better couples.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cell Couples in CCM+ norbinou Siemens 4 September 10, 2007 10:00
about couples bv Siemens 1 July 24, 2005 07:05
couples issue carno Siemens 1 April 16, 2004 02:58
Boundary Couples ale Siemens 0 January 26, 2004 06:09
couples or not couples... giosue Siemens 5 March 1, 2003 01:11

All times are GMT -4. The time now is 16:51.