|
[Sponsors] |
August 21, 2007, 17:20 |
adding a shell for sensor points
|
#1 |
Guest
Posts: n/a
|
Hello,
I would like to have the pressure vs. time data from my transient simulation, only for 3 points in my domain, for example z=0.25 x,y=0. I am trying to do that via "monitor cell behavior" in star-guide, which needs a .set file. I figured out where to make that .set file. Also, it seems that I can add shells by clicking on cells or vertices in the cell tool, but I can't find anything asking for coordinates. Please let me know how can I achieve this. Thanks, Kian Mehravaran |
|
August 22, 2007, 03:17 |
Re: adding a shell for sensor points
|
#2 |
Guest
Posts: n/a
|
cset news gran
have a look in the commands manual. |
|
August 22, 2007, 09:50 |
Re: adding a shell for sensor points
|
#3 |
Guest
Posts: n/a
|
Hello Ralphie,
I see now that the way to go in star-cd is with the commands. I started only 2 days ago. Thank you very much. Kian |
|
August 22, 2007, 11:06 |
Re: adding a shell for sensor points
|
#4 |
Guest
Posts: n/a
|
Good luck. Starting into the world of Star-CD is quite a difficult task.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to write a file for SENSOR points | Yongli | Siemens | 0 | June 24, 2008 00:03 |
OFILE SENSOR | guest7777 | Siemens | 0 | April 20, 2006 05:12 |
Sensor points | Aline | Siemens | 2 | August 16, 2004 09:52 |
A problem about the sensor points | Lee | Siemens | 3 | October 31, 2003 13:32 |
a better sensor | achim | Siemens | 1 | January 19, 2001 15:39 |