2D Results different the 3D results

Chinamuzhi · November 28, 2014, 09:22

I find a big problem when caculated the two-dimension circular pipes model with Star-CCM9.02.When I convert Regions to 2D.The results of the 2D were different from 3D.The volecity(i) in 2D Region si roughly half of the results when caculated in 3D Region directly. The 3D results were close to the literature.

I buit a cylindrical coordinate system.
The physics models: Constant desity
laminar
Gradients
liquid
Segregated Flow
Steady
Three Dimensional
Inlet volecity fild function:1*0.002-10964*0.002*($$Position("Cylindrical 1")[0]*$$Position("Cylindrical 1")[0])

Thanks a lot to give me a help.

Chinamuzhi · December 3, 2014, 04:44

My teacher told me that :Maybe Star-CCM+ won't use the cylinderical N-S equation when caculated in the 2D plane and did't regard the rectangles as the section of the cylindercial pipes.

November 28, 2014, 09:22	2D Results different the 3D results	#1
Chinamuzhi New Member 王慕之 Join Date: Sep 2014 Posts: 2 Rep Power: 0	I find a big problem when caculated the two-dimension circular pipes model with Star-CCM9.02.When I convert Regions to 2D.The results of the 2D were different from 3D.The volecity(i) in 2D Region si roughly half of the results when caculated in 3D Region directly. The 3D results were close to the literature. I buit a cylindrical coordinate system. The physics models: Constant desity laminar Gradients liquid Segregated Flow Steady Three Dimensional Inlet volecity fild function:10.002-109640.002($$Position("Cylindrical 1")[0]$$Position("Cylindrical 1")[0]) Thanks a lot to give me a help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OpenFOAM - Validation of Results	Ahmed	OpenFOAM Running, Solving & CFD	10	May 13, 2018 18:28
lid driven cavity varying results	yasmil	OpenFOAM Running, Solving & CFD	2	October 6, 2016 21:42
interFoam simulation yields inconsistent results for alpha1 surface	Ralinus	OpenFOAM Running, Solving & CFD	8	January 13, 2014 08:54
CFD results not close to experimental results	cider	STAR-CCM+	0	July 8, 2013 07:53
Different Results from Fluent 5.5 and Fluent 6.0	Rajeev Kumar Singh	FLUENT	6	December 19, 2010 11:33

December 3, 2014, 04:44		#2
Chinamuzhi New Member 王慕之 Join Date: Sep 2014 Posts: 2 Rep Power: 0	My teacher told me that :Maybe Star-CCM+ won't use the cylinderical N-S equation when caculated in the 2D plane and did't regard the rectangles as the section of the cylindercial pipes.