|
[Sponsors] |
two-ways FSI problem on co-simulation star ccm+ and abaqus |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 25, 2018, 21:26 |
two-ways FSI problem on co-simulation star ccm+ and abaqus
|
#1 |
New Member
鲍健
Join Date: Dec 2018
Posts: 7
Rep Power: 7 |
recently,I use star-ccm+ co-simulation to combine star-ccm+ and abaqus to achieve two-ways FSI problem about VIV.I monitor the displacement of one point on the riser middle ,it appears changes.but in pressure contour the riser can not deform ,I can not configure the problem
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
problem: FSI + DFBI motion in Star CCM | mohammadizadi | STAR-CCM+ | 1 | April 30, 2018 16:01 |
abaqus star ccm co simulation | Mustafalboro | STAR-CCM+ | 0 | July 25, 2017 16:13 |
Star CCM+ and Abaqus coupling (FSI) | Mustafalboro | STAR-CCM+ | 0 | July 7, 2017 05:26 |
prestrain in FSI problem | mina.m | STAR-CCM+ | 0 | October 31, 2013 11:39 |