StarCCM+ 3D-CAD modeler

arulnambi_palani · July 19, 2019, 07:43

Hi guys,

I am new to StarCCM+ and trying to do some mesh repairs in "Surface repair". But the Options are quite new and there are very less YouTube Videos on this Topic.
Could anyone suggest me any tutorials that would help me? It is really needed and I would be glad to see any help materials/ links.

Thank you,
Arul.

jalvathi · July 19, 2019, 08:21

Hi Arul,

I am not sure if you have worked with any pre processing software earlier. I find the surface repair tool otpions to be similar to ANSA preprocessor. Except, I find ANSA more sophisticated. There are options like select edges, faces and also closed edges and I think you can get a hang of it very soon.

In case if you aren´t findnig any video tutorials, you can either search in the StarCCM+ documentation as "Surface Repair User Interface" or you can check if you can have access to the Steve portal where there could be someone to support.

All the best!

Regards,
Jalvathi

nalamyogesh · July 22, 2019, 08:17

Hi Arul,

You can do the tutorial for "Brake Assembly". I think it has covered all major surface repair options.

-Yogesh

arulnambi_palani · July 22, 2019, 10:17

Thank you Jalvathi.
Unfortunately, I don't have any Prior experience with ANSA. In StarCCM+, I can do the Basic opertaions in Surface repair but not with respect to geometry modification. For example, if i have to Import or create a new part and adapt the exisiting mesh based on the new geometry. This is where I am lacking Information.

Quote:

Originally Posted by jalvathi

Hi Arul,

I am not sure if you have worked with any pre processing software earlier. I find the surface repair tool otpions to be similar to ANSA preprocessor. Except, I find ANSA more sophisticated. There are options like select edges, faces and also closed edges and I think you can get a hang of it very soon.

In case if you aren´t findnig any video tutorials, you can either search in the StarCCM+ documentation as "Surface Repair User Interface" or you can check if you can have access to the Steve portal where there could be someone to support.

All the best!

Regards,
Jalvathi

arulnambi_palani · July 22, 2019, 10:20

Thanks Yogesh. I ll look into it.

Quote:

Originally Posted by nalamyogesh

Hi Arul,

You can do the tutorial for "Brake Assembly". I think it has covered all major surface repair options.

-Yogesh

July 19, 2019, 07:43	StarCCM+ 3D-CAD modeler	#1
arulnambi_palani New Member Arulnambi Palani Join Date: Jun 2019 Location: Stuttgart, Germany Posts: 6 Rep Power: 6	Hi guys, I am new to StarCCM+ and trying to do some mesh repairs in "Surface repair". But the Options are quite new and there are very less YouTube Videos on this Topic. Could anyone suggest me any tutorials that would help me? It is really needed and I would be glad to see any help materials/ links. Thank you, Arul.

July 19, 2019, 08:21		#2
jalvathi New Member Jalvathi Join Date: Apr 2019 Posts: 7 Rep Power: 7	Hi Arul, I am not sure if you have worked with any pre processing software earlier. I find the surface repair tool otpions to be similar to ANSA preprocessor. Except, I find ANSA more sophisticated. There are options like select edges, faces and also closed edges and I think you can get a hang of it very soon. In case if you aren´t findnig any video tutorials, you can either search in the StarCCM+ documentation as "Surface Repair User Interface" or you can check if you can have access to the Steve portal where there could be someone to support. All the best! Regards, Jalvathi arulnambi_palani likes this.

July 22, 2019, 08:17		#3
nalamyogesh Member Yogesh Nalam Join Date: Sep 2012 Location: München, Germany Posts: 54 Rep Power: 13	Hi Arul, You can do the tutorial for "Brake Assembly". I think it has covered all major surface repair options. -Yogesh arulnambi_palani likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Changing Pitch Ratio in StarCCM CAD	KindaHungry	STAR-CCM+	0	August 20, 2018 06:15
[Workbench] Automatically update CAD in Design Modeler	Morfs	ANSYS Meshing & Geometry	0	May 14, 2013 15:30
How to import CAD into Fluent (Design Modeler)?	shadyenany	FLUENT	2	August 9, 2011 20:14
importing cad geometry, starCCM 64bit??	syd	STAR-CCM+	3	March 30, 2010 07:17
STAR-Works : Mainstream CAD with CFD	CD adapco Group Marketing	Siemens	0	February 13, 2002 12:23