Monitoring Progress of Design Manager

JVSAIL13 · January 16, 2020, 08:40

Hi All,

I was wondering if anyone knows how to see the individual residuals before they have solved for each design point in a design manager project?

Kind Regards,

Jack

bluebase · January 23, 2020, 08:58

Hi Jack,

in the folder where your design manager study is running, there should be a folder called .mdxruntime
The individual simulations are run in this folder. You can find the log files of running simulations. That way you can follow the current output. If this is not enough, you'll also find the host and port of that simulation in the log. This information can be used to "connect to server" with the starccm client.

Best regards,
Sebastian

January 16, 2020, 08:40	Monitoring Progress of Design Manager	#1
JVSAIL13 New Member Jack Vincent Join Date: Jan 2020 Posts: 1 Rep Power: 0	Hi All, I was wondering if anyone knows how to see the individual residuals before they have solved for each design point in a design manager project? Kind Regards, Jack

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Design Manager	AS_Aero	STAR-CCM+	0	March 8, 2018 06:15
CFX Solver Manager is not monitoring progress	Cheong92	CFX	1	January 16, 2018 08:40
Edit/stop run in progress without solver manager	N.R.	CFX	12	June 17, 2015 02:13
Info: Short Course On Thermal Design of Electronic Equipment	Arnold Free	Main CFD Forum	0	August 10, 1999 10:18
CFD - Trends and Perspectives	Jonas Larsson	Main CFD Forum	16	August 7, 1998 16:27

January 23, 2020, 08:58		#2
bluebase Senior Member Sebastian Engel Join Date: Jun 2011 Location: Germany Posts: 567 Rep Power: 21	Hi Jack, in the folder where your design manager study is running, there should be a folder called .mdxruntime The individual simulations are run in this folder. You can find the log files of running simulations. That way you can follow the current output. If this is not enough, you'll also find the host and port of that simulation in the log. This information can be used to "connect to server" with the starccm client. Best regards, Sebastian