Star-CCM+ Not opening

Kendricklamar · November 22, 2020, 19:51

Has STAR-CCM+ given any of you problems in the past when trying to open it? The program runs but does not display on the screen. “Design STAR-CCM+ simulation completed. Server process ended unexpectedly (return code 8)” is the warning which I get when I try to open a project directly. I have tried uninstalling the program and reinstalling it multiple times, but the error seems to persist. Any help on this would be appreciated.

bluebase · November 25, 2020, 10:45

The manual states that exit code 8 means a licensing error occurred.

In the 2020 manual (v15), you'll find this information in the following path:
StarCCM > Client-Server Setup > Client-Server Connections > Running the Client in Batch

You might have missed to set licensing options when you run in batch. Have a look into that article from the manual:
StarCCM > Client-Server Setup > Command-Line Reference
or, if you want to run the Design Manager:
StarCCM > Design Manager > Design Manager Reference > Command Line Options Reference

November 22, 2020, 19:51	Star-CCM+ Not opening	#1
Kendricklamar New Member Abdulrahman Join Date: Nov 2020 Posts: 3 Rep Power: 5	Has STAR-CCM+ given any of you problems in the past when trying to open it? The program runs but does not display on the screen. “Design STAR-CCM+ simulation completed. Server process ended unexpectedly (return code 8)” is the warning which I get when I try to open a project directly. I have tried uninstalling the program and reinstalling it multiple times, but the error seems to persist. Any help on this would be appreciated.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem when imported geometry from 3D CAD to star ccm,	TAREK GANAT	STAR-CCM+	1	May 21, 2013 22:15
[Commercial meshers] Using starToFoam	clo	OpenFOAM Meshing & Mesh Conversion	33	September 26, 2012 04:04
[Other] StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 04:38
error in star ccm	maurizio	Siemens	3	October 16, 2007 05:17
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 04:15

November 25, 2020, 10:45		#2
bluebase Senior Member Sebastian Engel Join Date: Jun 2011 Location: Germany Posts: 566 Rep Power: 20	The manual states that exit code 8 means a licensing error occurred. In the 2020 manual (v15), you'll find this information in the following path: StarCCM > Client-Server Setup > Client-Server Connections > Running the Client in Batch You might have missed to set licensing options when you run in batch. Have a look into that article from the manual: StarCCM > Client-Server Setup > Command-Line Reference or, if you want to run the Design Manager: StarCCM > Design Manager > Design Manager Reference > Command Line Options Reference