|
[Sponsors] |
February 25, 2021, 10:45 |
Body Traslation in quiet flow
|
#1 |
New Member
Svetlano Verdrum
Join Date: Nov 2020
Posts: 1
Rep Power: 0 |
Hello everyone, I need to simulate a 2D cylinder translating in a quiescent airflow for my master thesis project, I'm trying to use the overset mesh approach but I'm not much experienced with simulations of moving bodies.
I've given a first try simply overlapping the two mesh (overset and background) and making sure the cells across the interface are of a comparable size but the residuals keep going higher until they reach values of 10e07, meanwhile the drag coefficient seems to be slightly constant despite its value is completely out of scale. I've tried to find some tutorial online and to find some kind of tips on the guide but despite my researching efforts I can't really find anything helpful, can anyone give me any tips or opinions about how I should set this kind of simulation? IT IS REALLY URGENT,YOUR HELP COULd REALLY BE HELPFUL !!! Last edited by AeroX; February 26, 2021 at 08:17. |
|
Tags |
overset issiue, overset mesh, star ccm+ help, translating mesh, translation motion |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Validation setting for bluff body under cross flow | fit78 | FLUENT | 0 | October 16, 2020 12:07 |
Boundary condition for transonic flow over slender body | rock.senthilkumar | FLUENT | 0 | February 19, 2013 05:26 |
How to visualize the solid body in multiphase flow grid? | asoltoon | OpenFOAM Post-Processing | 2 | February 2, 2013 12:40 |
Turbulent flow over a blunt body Error Message | pradon16 | FLUENT | 0 | July 27, 2012 16:31 |
Modeling 3D external Flow over a streamlined body. | gacins | Siemens | 4 | January 22, 2012 05:46 |