2D Automated Mesh not working -- CFD Online Discussion Forums

March 17, 2022, 08:15		#2
visheshgarg1996 New Member Vishesh Garg Join Date: Jun 2020 Location: Bordeaux, France Posts: 1 Rep Power: 0	The problem is related to the placement of the cad in the coordinate system. The z plane should be aligned with any one face of the cad, only then the automated 2d mesh option can work. If you extruded the cad symmetrically in both directions the reference (0,0,0) is inside the geometry. I suggest you move the cad and align with the reference point or extrude in one direction only. Hope this helps!!

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] non uniform mesh near the stl object	vava10	OpenFOAM Meshing & Mesh Conversion	0	January 31, 2021 14:41
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
Mesh interfaces and reactions in porous media - why not working?	RossFS	FLUENT	0	December 15, 2013 05:40
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55

All times are GMT -4. The time now is 10:14.