|
[Sponsors] |
December 4, 2018, 08:44 |
Fully turbulent continuous adjoint?
|
#1 |
New Member
Join Date: Feb 2018
Posts: 27
Rep Power: 8 |
Hi, I am using v5.0.0 and I am trying to run a fully turbulent CONTINUOUS adjoint RANS 2D case (RAE2822, Re =6.5 Mill, M = 0.729, aoa = 2.31º) with SA model. I am using JST for the mean flow and adjoint equations and scalar upwind for turbulent flow and adjoint. No multigrid and CFL = 0.5 and I still can't get it to converge.
(1) Should I expect it to converge? (2) If (1) = yes, can anyone recommend proper numerical settings? i've browsed the test cases and forums but haven't found anything relevant. Thanks a lot for the help |
|
December 9, 2018, 15:18 |
|
#2 |
New Member
Join Date: Feb 2018
Posts: 27
Rep Power: 8 |
I have the same problem with version 6.1.0. Any advice from anyone?
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Discrete vs Continuous Adjoint solution variable: Scaling/normalization issue? | asitav | SU2 | 2 | November 21, 2018 19:11 |
How to calculate Reynolds shear stress of a fully turbulent channel flow | yansheng | STAR-CCM+ | 1 | March 8, 2016 17:35 |
3D pipe flow - Using UDF's to define fully developed turbulent flow on the inlet | Taz-CFD | ANSYS | 0 | February 19, 2016 07:49 |
Fully develop turbulent flow | s-ammarlu | OpenFOAM | 0 | June 1, 2011 13:25 |
C3X Fully turbulent convergence problem | Mazze[ITA] | CFX | 4 | May 10, 2011 18:58 |